Touch Control Panel - Hotpoint RH967 Use And Care Book Manual

Your TouchControlPanel
@
1. Readout Panel. Displays time of day, time or 7. Quick Set Pad. Use this pad as a short-cut
temperature during cooking functions, method for entering cooking time and power
power level being used, cooking mode and
level. (See page 16.)
pertinent instructions of what to do next. 8. Number Pads. Touch these pads to enter
2. Power Levei. Touch this pad before entering Time, Temperature, Power Level, Quick Set
another power level number if you want to
digits, or Auto Code.
change from automatic Power Level 10
9. Auto Cook Pad, Chart helps you select
(HIGH) for cooking or Power Level 3 (LOW) appropriate Code. Using Codes for popular
for defrosting. foods eliminates looking in Cookbook for
3. Start. Must touch this pad for oven to begin
cooking times and power levels.
any functions.
10. Auto Roast Pact.insert probe, touch this pad,
4. Ciear/Off. When touched, it stops the oven and desired number pad for code to slow-
and erases all settings except time of day.
cook or temperature cook meat with auto-
5. Hoid/Timer. This feature uses no microwave
matic preset program.
energy while it functions as both a kitchen 11. Time Cook. Microwave for a preset amount
timer or as a holding period between defrost of 'time using automatic Power Level 10 or
and time or temperature cooking (See page change power level after setting time. (See
19.) page 15.)
& Clock. Touch this pad to enter time of day or 12. Defrost. Gentle, more uniform thawing with
check time of day while microwaving. To set little or no attention at automatic Power
clock, first touch CLOCK pad and then enter
Level 3, or change power level after entering
time of day. For example, if time is 1:30,
time. (See page 16.)
touch number pads 1, 3, and O and 1:30 will 13. Temp Cook. Use the temperature probe to
appear in readout display. "Start" will flash cook by using a preset temperature. Oven
on readout directing you to touch START
shows temperature until preset temperature
thus setting the clock. If you wish to reset or is reached and then turns off. (See page 18.)
change time, simply repeat above process.
9