Time Cook - Hotpoint RE968 How To Get The Best

Cooking by Time
The Time Cook featureallowsyou
to presetthe cookingtime.
Power Level 10 is automatically set
for time cooking, but you may
change this for more flexibility.
See"your Cookbook.
When the oven completes Time
Cooking, it automatically shuts off.
It will then display "End" and beep
once a minute until you either open
the door or touch the CLEAR/OFF
pad.
To become better acquainted with
Time Cook function, make a cup of
coffee by using the following steps.
—
#t?!5
Step 1: Fill a cup 2/3 full of water
and add 1 teaspoon of freeze dried
coffee. Use a cup that has no metal
decoration. Place cup in oven and
close door.
Step 2: Touch TIME COOK. The
display shows :0. ENTER COOK
TIME flashes. Power Level 10 is
automatically set, but does not
appear on display.
Step 3: Select your time. Touch 1, 2,
and Ofor a minute and 20 seconds.
TIME COOK and 1:20are
displayed.
Step 4: Touch START. Time
counting down shows on display.
Step 5: When time is up, the oven
sounds, oven light and fan shut off.
The display will show "End".
Step 6: Open the door or touch
CLEAR/OFF pad.
Questionsand Answers
Q. I set my ovenfor the time called
for in the recipe but at the end of
the time allowed,my dishwasn't
done. What happened?
e
A. Since house power varies due to
time or location, many Time Cook
recipes give you a time range tO
prevent overcooking. Set the oven
for minimum time, test the food for
doneness, and cook your dish a
little longer, if necessary.
Q. I want to cook on a Power Level
otherthan HIGH, what do I need to
do?
A. To change the Power Level,
touch the POWER LEVEL pad after
entering desired cooking time.
Enter the desired number and then
touch START.
Q. Can I interruptmy Time Cook
functionto check the food?
A. Yes.To resume cooking, simply
close the door and touch START.
NOTE: Microwave power will not
come on until you are ready. You
must touch START for cooking to
begin.
-
Q. I touchedthe numberpadsand
selectedmy power ievel.When I
touched START,however,my oven o
didn'tcome on. Why not?
A. The TIME COOK pad must be
touched before setting the number
pads or else your oven will not
begin cooking.
Q. I tried to change Power Level
but the displaychanged back to
cooking time. Why?
A. After touching Power Level pad
you only have 4 seconds to enter
the number. Try setting controls
again.
10