Hotpoint RH967 Use And Care Book Manual page 23

Automatic cooking control
Table of Contents

Advertisement

Self-Cleaning YourConventional O ven
If done properly, it will take only a few moments to
start the self-cleaning cycle on your range, After
setting your range to self-clean, a high heat temper-
ature removes the soil in the oven cavity, The dirt
will then disappear by turning into an ash waste or
evaporating into an odorless and colorless vapor.
When the cycle is complete, allow your range to
cool and enjoy combination cooking-in a spa~kling
clean oven.
While you are becoming acquainted with your self-
cleaning oven, we recommend 2 hours for the aver-
age cleaning function, but in some cases a longer
cleaning time, up to 3 hours may be necessary. In
order to judge the degree of soil, look at the oven
floor and walls. Light, spatter and thinner spills
would generally need only 2 hours cleaning. Heavy
greasy spills and spatter on the oven interior would
need up to 3 hours.
~~~~
I: Remove all cookware
and food as well as heavy soil de-
posits from the oven. Clean spat-
ters or spills around the oven door,
rectangular flanges, and gasket.
Then close the door.
~~~~
2: Turn Oven Set Knob
and Oven Temp Knob clockwise to
CLEAN. The control will snap into
final position when the CLEAN po-
sition is reached.
n
~~~~
3: Push and hold Clean
Button while sliding the Latch to
CLEAN.
%" \ .
-1"
S~EP
4: Set The Automatic
Oven Timer:
Push in knob on Stop (Clean)
Dial and turn to the time you
wish oven to stop cleaning. Add
the number of hours needed for
cleaning to the present time of
day.
Cleaning Indicator Lights come
on when
all steps
ate set
properly.
If you wish to clean at a later
time set Start Dial to that time.
NOTE: A slight odor may be de-
tected especially during the first
few cleanings. Do not be alarmed.
This is normal during the self-
cleaning cycle.
When cleaning temperature
is
reached, Lock Light comes on and
door cannot be unlatched until
Lock Light goes off.
~~~~
~: When Lock Light goes
off, push and hold the Clean Lock
Button
while
sliding
Latch
to
OPEN.
T!hs——
——
.
~~~~
6: Turn Oven Set Knob
OFF.
I
to
Questions
andAnswers
Q. What should I do if excessive
smoking occurs during cleaning?
A. This is caused by excessive
grease and you should switch the
&
ven Set Knob to OFF. Open win-
ws and doors to rid room of
eke. Ailow the oven to cool for
at /east one hour before opening
he door.
Wipe up the excess
grease and reset the clean cycle.
Q. Why did the Lock Light come
on when i first set the oven for
CLEAN?
A. Lock Light glowing indicates
that oven is too hot. Turn Oven Set
Knob to OFF and open Oven Door
to cool the internal cavity. After a
short period of time, reset controls
for cleaning.
Q. My oven shelves have become
gray after several cleanings. Is this
normal?
A. Yes. After many cleanings, the
shelves may lose some luster and
discolor to a deep gray color.
Q. Why do I have ash left in my
oven after cleaning?
A. Some types of soil will leave a
deposit which is ash. It can be re-
moved with a damp sponge or cloth.
Q. Why is there still some black
soil left after cleaning?
A. You did not time the oven to
clean long enough. This deposit
will be removed in later cleanings.
Q. If my oven clock is not working
can I still self-clean my oven?
A. No. Your Automatic Oven Timer
uses the range clock to help start
and stop your self-cleaning cycle.
Ke
E
—-
23

Advertisement

Table of Contents
loading

Table of Contents