Safety Warnings And Guidelines - Monoprice Maker Select Plus IIIP User Manual

SAFETY WARNINGS AND GUIDELINES

 The printer is very sensitive to static electricity. Always contact a grounded object
before working with this device. It is recommended to wear an anti-static wrist
strap when working with this device.
 Power off and unplug the printer from the power source prior to making repairs or
alterations.
 The printer operates at high temperatures. Always allow the nozzle, the extruded
material, and print bed to cool before touching.
 Some types of filament can emit a strong odor when heated. Always use this printer
in a well-ventilated area.
 Do not leave the printer unattended when in operation.
 Do not expose this printer to excessive vibration.
 Do not expose this printer to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the printer. If moisture does get in or on
the printer, immediately unplug it from the power outlet and allow it to fully dry
before reapplying power.
 Do not place the printer near a heat source, such as a fireplace, heating vent,
radiator, etc. Do not leave it in direct sunlight.
 This printer uses a NEMA 5-15 three prong, grounded plug. Do not use a "cheater"
plug or otherwise bypass the grounding pin.
 Do not allow the power cord to be crimped, pinched, stepped on, etc. Ensure that
the power cord does not present a tripping hazard.
 Never unplug the unit by pulling on the power cord. Always grasp the connector
head.
 This device should only be operated by qualified adults.
 In the event of serious operating problem, stop using the unit immediately.
 Always take care when using the scraper. Never direct scraper action towards your
fingers.
4