INSTALLATION GUIDE
EN1B-0478GE51 R1216
The FALCON controller will be connected to the CARE PC as shown in the
following figure.
For connecting the EAGLE controller to the CARE PC you need an USB cable of
type A Male to type B Male (Type B standard).
The EAGLE controller will be connected to the CARE Windows 8 PC as shown in
the following figure.
Procedure
1. Insert the A Male connector of the USB cable into an USB inferface jack of the
PC and insert the B Male connector into the controller´s USB device interface
jack.
2. In Windows, start the device manager.
16
CARE
EAGLE Controller