Usb Driver Installation For Windows 7; Excel Web Controller; Excel Web Ii Controller - Honeywell EXCEL CARE 5000 Installation Manual

INSTALLATION GUIDE
EN1B-0478GE51 R1216
15. Click Next > to continue.
RESULT: Setup installs the selected components. Setup also creates a copy
of the existing CARE.INI file in the Windows and WINNT directory,
respectively.
After all files have been copied, the InstallShield Wizard Complete
dialog box is displayed
16. Click Finish to close the setup.
NOTE: This chapter refers to different target audiences, CentraLine and
Honeywell. In the functional descriptions and screenshots, the CentraLine
product names EXCEL WEB and EXCEL WEB II are shown and used,
whereas in the CARE software, the CentraLine product names are
replaced with the selectable Honeywell product names of the EXCEL WEB
and EXCEL WEB II.
NOTE: The access to the EXCEL WEB controller via USB from a Windows 7 PC
does not need a driver installation for the D-Link DUB E100 USB adapter.
A driver installation is only necessary if you would add a further USB
network card to your PC using the D-Link DUB E100 USB adapter. If so,
download the corresponding driver from the manufacturer´s home page
and install the driver via standard procedure for Windows 7 drivers.
The EXCEL WEB controller will be connected to the CARE PC as shown in the
following figure.
For connecting the EXCEL WEB II controller to the CARE PC you need an USB
cable of type A Male to type B Male (Type B standard).
The EXCEL WEB II controller will be connected to the CARE Windows 7 PC as
shown in the following figure.
10

USB Driver Installation for Windows 7

EXCEL WEB Controller

EXCEL WEB II Controller

CARE