Keys Fitness KF-PT Owner's Manual page 6

Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 2
Connect Back Pad Support Frame (5) to both Upright
Frames (1) using Bolts (3), Washers (19), Nylon Lock
Nuts (5) and Small Plates (11). NOTE: Small Plates
(11) are to be placed on the outside of the machine.
Connect Left and Right Angle Supports (,3) to Base
Frame (8) and Cross Frame (9) using Bolts (3),
Washers (19) and Nylon Lock Nuts (5).
Connect Right and Left Chin-Up Bars (6,7) to Upright
Frames using Bolts (), Washers (19), Nylon Lock Nuts
(5) and Big Plates (1). NOTE: Big Plates (1) are to
be placed on the outside of the machine.
6