Owner’s Manual and are familiar with safety information and precautions. • This unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service techni- cians on site to take care of you, our valued customer.
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Slide Linear Bearing (8), Clip, (9), Rubber Spacer (3), and Plug onto Weight Support. Slide Weight Support (1), Round Bumper (4) and Safety Slide (4) onto Rod (7) in the order shown. Secure Right Safety Hook (6) to Safety Slide (4) using Bolt (14), Washers (16) and Nylon Lock Nut (15).
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Place assembly into base of Half Cage and secure top of assembly into Guide Rod Base (3) with Rubber Spacer (5), Bolts (19), Washers (17) and Nylon Lock Nuts (18).
0-00 0-003 0-00091 0-00653 06-00016 06-00138 06-0008 06-00034 06-0008 06-00019 KF-HCS Parts list Rev B description ***Reference Only*** WEIGHT SUPPORT KPS-HCS BAR, KPS-HCS GUIDE ROD BASE KPS-HCS SAFETY SLIDE KPS-HCS LEFT SAFETY HOOK KPS-HCS RIGHT SAFETY HOOK KPS-HCS ROD, KPS-HCS...
Product. To obtain warranty service, you must contact a Keys authorized retailer, service technician or Keys Fitness at our phone number located in this manual. Any parts determined to be defective must be returned to Keys to obtain warranty service. You must prepay any shipping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the parts or Product.
Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482...