This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Help line. We have trained service technicians on site to take care of you, our valued customer.
• This unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
Page 6
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Main Frame (1) to Rear Base (10) using: x (39) Bolt 4 x (4) Washer x (44) Nylon Lock Nut...
Page 7
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Connect Side Frame () to Main Frame (1) using: 1 x (38) Bolt 3 x (44) Nylon Lock Nut Insert Stopper Prong (15) into Side Frame. 7 x (4) Washer x (39) Bolt...
Page 8
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Complete the Adjustable Foot Frame (7) assembly using: 1 x (31) Roller Tube x (19) Upholstered Roller Pad x (5) Big Plug Complete Seat Pad (0) assembly using: 1 x () Seat Support x (40) Bolt x (4) Washer...
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 4 Slide Adjustable Foot Frame (7) assembly into Main Frame and secure with Pop pin. Insert Seat Pad (0) assembly into Main Frame and secure with Pop Pin.
Product from you. This Warranty becomes VALID ONLY if the product is pur- chased through a Keys Fitness authorized dealer unless otherwise authorized by Keys Fitness in writing and must be assembled / installed according to the instructions included with the Product.
Page 13
Keys Fitness Products, l.P. 4009 distribution drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482...