This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Help line. We have trained service technicians on site to take care of you, our valued customer.
• This unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
Page 6
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect U Shaped Base (3) to Front and Rear Cross Frames (1 and ) using Bolts (11), Washers (9) and Nylon Nuts (15).
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Connect Back and Lower Back Pads (4 and 5) to U Shaped Base (3) using Bolts (1) and Washers (9).
Parts list Ref # Part # 3-01045 3-0104 3-01047 8-0039 3-0040 0-0039 0-00393 0-0003 0-003 0-004 0-0017 0-00081 0-0008 0-0010 0-00091 0-00391 0-0013 0-00703 KF-FB Parts list Rev A description FRAME, FRONT CROSS KF-FB FRAME, REAR CROSS KF-FB U BASE FRAME, KF-FB BACK PAD, KF-FB PRESS ARM KPS-1850 FOOT CAP, RIGHT 50.8 KF SERIES...
Product from you. This Warranty becomes VALID ONLY if the product is pur- chased through a Keys Fitness authorized dealer unless otherwise authorized by Keys Fitness in writing and must be assembled / installed according to the instructions included with the Product.
Page 11
Keys Fitness Products, l.P. 4009 distribution drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482...
Need help?
Do you have a question about the Flat Bench KF-FB and is the answer not in the manual?
Questions and answers