• This unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Left and Right Foot Caps (45 and 46) to the Rear Base (12) using: 2 x (47) Screw 2 x (48) Washer Connect Main Base (1) to Rear Base (2) using: 2 x (34) Bolt 2 x (37) Nylon Lock Nut Slide Guide Rods (9) down into Rear Base (2) and secure...
Page 6
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Slide Weight Stack Bumpers (24) and Weight Holder Slide (12) onto guide rods as shown. Connect Upright (3) to Main Base (1) using: 2 x (33) Bolt 2 x (37) Nylon Lock Nut Attach Seat Support (6) to Main Base (1) using: 2 x (33) Bolt...
Page 7
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Slide Top Cross Frame (5) on top of Guide Rods and secure using: 2 x (36) Bolt Attach Top Frame (4) to Upright (3) and Top Cross Frame (5) using: 8 x (31) Washer Attach Bar Holder (8) to Top Frame (4) using:...
Page 8
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 4 Complete Cable (15,17) assembly using: 7 x (21) Pulley 14 x (31) Washer 7 x (37) Nylon Lock Nut 2 x (28) Pulley Plate Attach Long Bar (19) and Short Bar (13) as shown. 4 x (33) Bolt 8 x (29) Pulley Spacer 3 x (38) Bolt...
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 5 Complete leg hold down assembly using: 1 x (10) Roller Pad Frame 2 x (43) Big Plug Note: If needed, it is recommended that a rubber mallet be used to secure Big Plug (43).
END CAP, 50.8 PLUG, ROLLER PAD TUBE CAP, KF SERIES JAM NUT 1/2" JAM NUT 1/2" SLEEVE, EZ GLIDE 1 50.8 KF-LATM SLEEVE, EZ GLIDE 2 50.8 KF-LATM SCREW, BUTTON HEAD SOCKET CAP M8X25 WASHER 8, 9*28*2 ALLEN WRENCH S6...
Product. To obtain warranty service, you must contact a Keys authorized retailer, service technician or Keys Fitness at our phone number located in this manual. Any parts determined to be defective must be returned to Keys to obtain warranty service. You must prepay any shipping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the parts or Product.
Page 13
Keys Fitness Products, l.P. 4009 distribution drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482...