GENERGY 2013022 Instructions For Use Manual page 56

4.2 Transportation kit assembly
Pass the screw "1" across the Wheel axle, in the other side fixe nut "2" (Wheel
must be turn between head screw and nut).
Pass the screw across the frame hole and fix in the other side with a nut.
According below picture assembly the rubber foot, check carefully draw due to
there are 2 different types of foot according different models:
MONCAYO ANETO
MULHACEN FR6 SC6
GORBEA-ESTRELA
If you wish use handle, go
up the handle and then fix
with the pin connection in
the hole frame.
8