Check Prior To Operation; Battery Connection - GENERGY 2013022 Instructions For Use Manual

ENGINE SWITCH
BREAKER
GUARDIAN SC6
AC 230V IMPUT
SIGNAL CONTACTS FOR START
OUTPUT AC230V 32AH
DISPLAY
SIGNAL MODE SELECTOR
4 Checks prior to operation:
4.1 Battery connection (only electrical models with electrical startup).
BATTERY TERMINALS
Before charging the electrolyte and
connecting the battery, check that the
engine switch is in the "OFF" or "0"
position.
If you have any questions on
identifying the engine switch, check
chapter
Loosen the support fastening bolts for
the battery, extract and connect the
negative terminal. Normally positive
terminal is supplied connect from
factory.
FASTENING BOLTS
7