Table of Contents
Advertisement
PICTURE
Picture Mode
Backlight
Color Temperature
Gamma
Noise Reduction
Adaptive Contrast
Over Scan
Aspect Ratio
Color Range
VGA setting
Reset Picture Setting
Sound
Sound Mode
Surround Sound
Speaker
Audio Source
Reset Sound Setting
Setup
Scheduler
Signal Check Priority
CEC Control
Sleep Timer
Power Save
Software Update (USB)
Reset Default
Initial Setting
OSD Rotation
Menu Language
Time Format
Clock
Remote Operation
Keypad Operation
Anti-Image Retention
Select [Dynamic], [Cinema], [Custom], or [Standard].
Adjust Contrast, Brightness, Sharpness, Tint, and Color.
Adjust the Backlight setting.
Adjust Color Temperature and Gain.
Select a Gamma setting.
Adjust Noise Reduction.
Select On or Off for Adaptive Contrast.
Adjust Over Scan.
Adjust Aspect Ratio.
• Select [4:3], [16:9], [Zoom], [Cinema], or [Dot by Dot].
When Over Scan is set to Off, you can select [4:3], [16:9], or [Dot by Dot].
Adjust Color Range or set Automatic.
Adjust H Position, V Position, Clock, and Phase.
Resets the settings in the Picture menu back to their factory settings.
Select [Standard], [Dynamic], or [Custom].
Adjust Treble, Bass, and Balance.
Select On or Off for Surround Sound.
Select [Internal] or [External].
Select [Line In/HDMI1], [Line In/HDMI2], [Line In/HDMI3], or [Line].
Resets the settings in the Sound menu back to their factory settings.
• Change the schedule setting.
• The schedule function allows the display to be set to power on and off at different times. Up to seven
different schedules can be programmed.
• If schedules are overlapping then the schedule with the highest number will have priority over the
schedule with the lowest number. For example schedule #7 will have priority over schedule #1.
• Set [Priority1] to [Priority5] ([Priority1]: highest priority) as the priority of each signal. When the current
source signal is lost, the display attempts to find a new signal source according to the Signal Check
Priority setting.
• When [Signal Check Priority] is enabled, the display attempts to find a valid signal source according to
the Signal Check Priority setting at power on.
• When the signal source for which [Priority 1] is set is not found, the display checks other sources in
order of priority and switches to the available source with the highest priority.
• When the signal source with the highest priority recovers, the display automatically switches to the
source again.
• When [Signal Check Priority] is disabled, the display uses the last used source at power on.
• When [Signal Check Priority] is enabled and the signal source is USB, the USB data is automatically
played at power on.
Select On or Off for CEC Control.
Change the Sleep Timer setting or set Sleep Timer to Off.
Change the Power Save setting or set Power Save Mode to Off.
Updates software via the USB port.
Resets the settings in the Setup menu back to their factory settings.
Select [Landscape] or [Portrait] as the orientation of the OSD.
Change the language used for OSD Menu.
Select [12 Hour] or [24 Hour].
Set the time and date.
Enable or disable Remote Operation.
Enable or disable Keypad Operation.
Select [Picture shift] or [White pixel], or set Anti-Image Retention to Off.
English-19
Advertisement
Table of Contents
