Attaching Mounting Accessories - NEC E651-T User Manual

Attaching Mounting Accessories

The monitor is designed for use with the VESA mounting
system.
1. Attach Mounting Accessories
Be careful to avoid tipping monitor when attaching
accessories.
400mm
VESA Mounting
Interface (M6)
Mounting accessories can be attached with the monitor in the
face down position. To avoid damaging the screen face, place
the protective sheet on the table underneath the LCD. The
protective sheet was wrapped around the LCD in the original
packaging. Make sure there is nothing on the table that can
damage the monitor.
When using mounting accessories other than NEC compliant
and approved, they must comply with the VESA-compatible
mounting method.
NOTE:
• Do not leave the monitor in the face-up or face-
down position for more than one hour as this
may result in a negative effect on the screen's
performance.
• Prior to installation, be sure to place the monitor
on a flat area with adequate space.
2. Ventilation Requirements
When mounting in an enclosed space or recessed area,
leave adequate room between the monitor and the enclosure
to allow heat to disperse, as shown below.
400mm
Allow adequate ventilation or provide air conditioning around
the monitor, so that heat can properly dissipate away from
the unit and mounting apparatus; especially when you use
monitors in multiple screen.
NOTE: The sound quality of the internal speakers will
differ according to the acoustics of the room.
English-6