Table of Contents
Advertisement
4A. Attach one Curved Weight Horn (J) and one Curved Mounting Plate (L) to the
Rear Post (C) at the
2 - (16) Hex Bolt M12x1.75x105L
4 - (59) Curve Washer D21xD13x1
2 - (76) Nylon Nut M12
4B. Attach one Curved Weight Horn (J) and one Curved Mounting Plate (L) to
the lower portion of one Rear Post (C) by using:
2 - (16) Hex Bolt M12x1.75x105L
4 - (59) Curve Washer D21xD13x1
2 - (76) Nylon Nut M12
4C. Attach one Flat Weight Horn (I) and one Flat Mounting Plate (K) to one of
the Foot Beam (A) by using:
2 - (7) Hex Bolt M12x1.75x80L
4 - (52) Washer D24x13.5x2.5
2 - (76) Nylon Nut M12
4D. Repeat Steps 4A, 4B, 4C for the opposite side of the rack
Thoroughly tighten the hardware once complete.
STEP 4
location by using:
16
Advertisement
Table of Contents
