Summary of Contents for Ironman Fitness 6877.1-051116
Page 1
OWNER’S MANUAL Power Cage 6877.1‐051116 The specifications of this product may vary from this photo and are subject to change without notice. IRONMAN, IRONMAN TRIATHLON and M-DOT are registered trademarks of World Triathlon Corporation. This product is licensed by the World Triathlon Corporation.
SERVICE IMPORTANT: FOR NORTH AMERICA ONLY For damage or defective product, questions, replacement parts or any other service support, please contact our customer service department (8:00 AM - 5:00 PM Pacific Standard Time, Open Daily) by below methods: For Best Service Email: Service@paradigmhw.com Website: www.paradigmhw.com...
PRODUCT SAFETY WARNING: Before using this equipment you should consult with your personal physician to see if the Ironman Power Cage is appropriate for you. Do not use this equipment without your physician’s approval. Do not use this equipment if you have any of the following conditions or ailments: ...
ASSEMBLY PREPARATION Warning: It is highly recommend that you have assistance during the assembly of the IRONMAN strength equipment. 1. Tools for assembly: General tools you may need for the assembling this IRONMAN strength equipment: Metric Allen Key Set Metric Wrench Set and Adjustable Wrench ...
PART LIST Part# Description Q’ty. Part# Description Q’ty. Base Beam SCREW M6x10L Vertical Post Hex Bolt M12x1.75x105L Upper Beam Hex Bolt M12x1.75x85L Washer Front Crossbeam D13xD24x2.5 Spring Washer Wide Grip Bar D20xD12.2x3.2 Close Grip Bar Nylon Nut M12 Rear Crossbeam Cap Nut M12 Bar Bell Catch Flat End Cap D50xt2.0 Safety Catch...
STEP 1 1A. Attach Stability Plate (M) to the two Base Beams (A) by using: 2 - (8) Hex Head Bolt M12x1.75x100L 4 - (52) Washer D13xD24x2.5 2 - (76) Nylon Nut M12 Thoroughly tighten the hardware once complete. Appearance upon completion of Step 1.
STEP 2 2A. Insert the Vertical Posts (B) into the brackets of Base Beams (A) and fasten them into place by using: 8 - (7) Hex Head Bolt M12x1.75x80L 16 - (52) Washer D13xD24x2.5 8 - (76) Nylon Lock Nut M12 Note: The two Vertical Posts (B) with the IRONMAN logos on the Flat End Caps (130) should be installed in the front with the Flat End Caps (130) facing outwards.
STEP 3 3A. Attach the Rear Crossbeam (G) and the two Mounting Plates (L) to the two rear Vertical Posts (B) at the location of the matching by using: 4 - (7) Hex Head Bolt M12x1.75x80L 8 - (52) Washer D13xD24x2.5 4 - (76) Nylon Nut M12 Note: The Rear Crossbeam (G) should be installed with the IRONMAN logo facing forward.
Page 18
STEP 4 4A. Attach the Front Crossbeam (D) and the two Mounting Plates (L) to the two front Vertical Posts (B) at the location of the matching by using: 4 - (7) Hex Head Bolt M12x1.75x80L 6 - (52) Washer D13xD24x2.5 2 - (76) Nylon Nut M12 Note: The Front Crossbeam (D) can be installed at a height of 83”...
Page 20
STEP 5 5A. Attach the Stability Beam (K) and the two Mounting Plates (L) to the two rear Vertical Posts (B) by using: 4 - (16) Hex Head Bolt M12x1.75x105L 8 - (52) Washer D13xD24x2.5 4 - (76) Nylon Nut M12 Now that the cage is fully assembled, proceed with thoroughly tightening all the hardware.
ADJUSTMENT A. The two Bar Bell Catches (H) can be inserted into any of the holes along the Vertical Posts (B). Place them on opposite sides of the cage and at a comfortable height that will assist you during your workout. B.
WARRANTY MANUFACTURER’S LIMITED WARRANTY Paradigm Health & Wellness guarantees to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with Paradigm’s Owner’s Manual.
PARTS REQUEST FORM Paradigm Health & Wellness, Inc. EMAIL THIS FORM WITH YOUR RECIEPT OF PURCHASE TO Service@paradigmhw.com NAME: _______________________________________________________ ADDRESS: ____________________________________________________ CITY ______________ STATE ______________ ZIP ___________________ TELEPHONE: (Day) ____________________________________________ (Night) ____________________________________________ SERIAL#: _____________________________________________________ MODEL#: _____________________________________________________ PURCHASE DATE: _____________________________________________ PLACE OF PURCHASE: _________________________________________ PART # DESCRIPTION “YOUR ORDER WILL BE PROCESSED WITHIN 3 BUSINESS DAYS”...