Reading Out Or Printing Memory - TESTO 545 Instruction Manual

OUT
CLEAR
MEMORY
Location
Duct
M.05 N.0017
Museum
01: 1 3
Location
01.01
1998
M.05 N.0017
Lux
Location
824
M.05
ESC
Location
OUT
1. Reading out or printing memory contents:
If the "OUT" display is flashing and the
printing of the complete memory contents is started. Cancel
0 0 1 1
printout by pressing the
2. Selecting the location:
1
If
the required location. Select location by pressing
If printing is activated by pressing
(measurement series and cycles) for this location are printed.
Cancel printout by pressing the
3. Selecting the log:
ESC
Confirm the location selected above by pressing
The M.0x counter flashes in the display.
Select the log no. by pressing
ESC
Location
Press
Cancel printout by pressing the
ESC
4. Select the measurement cycle (only possible if a
measurement log consists of a measurement series):
Confirm the measurement log selected above by pressing
ESC
The N.0x counter flashes in the display.
Location
Select the measurement cycle by pressing
N.0017
Lux
824
The
Press the
mode. Confirm flashing save symbol
i
button.
Cancel printout by pressing the
is activated selection options appear in the display to select
.
activates a printout of the selected measurement log.
to display the values measured.
activates a printout of the selected measurement cycle.
button enables you to go back one step.
ESC
Location
17
Memory settings
Reading or printing memory
button to access the memory settings
button is pressed,
button.
at this point, all of the logs
button.
.
button.
via the
button.
.
.
.