Setting The Sound On/Off - i-SENS CareSens N Owner's Booklet

Step 6 Setting the Hour
Press or until the correct hour appears.
After the hour is set, press the S button to
enter the minute setting mode.
Step 7 Setting the Minute
Press or until the correct minute
appears. After setting the minute, press the S
button to enter the unit setting mode.
Step 8 Setting the Measurement Unit
The CareSens N can display results in mg/dL
or mmol/L. You may be able to change the
unit by pressing the or button, and then
press S button to confirm your setting.
However, in some countries, the meter may
have been set to the unit generally used in the
country (mg/dL or mmol/L). In this case, the
unit can not be changed and the unit change
setting step will be excluded.
Note:
The unit setting on the meter may be fixed for your meter, so
that you may not be able to change the setting.
14 www.i-sens.com

Setting the Sound On/OFF

Step 9
On pressing or , the screen will display
the On or OFF. Press the S button to confirm
the selection.
The meter will beep in the following instances,
if set to On.
• When the test strip is inserted in the meter
• When the blood sample is absorbed into the
test strip and the test starts
• When the test result is displayed
• When you push the S button or button to
check the memory
• When you push the button to set the post-
meal (PP2) alarm
• When it is time for a preset blood glucose
test
If the sound is set to OFF, none of the sound
functions will work.
Note:
Only when the sound is set to OFF,
display.
icon appears on the
www.i-sens.com 15