Before You Start; Package Contents; Setting Up The Access Point - AT&T activeARC ARC1000MAP Configuration Manual

Before you start

Package Contents

Unpack the contents to verify:
• AT&T activeARC ARC1000MAP
®
• 12V Power Adapter
• Wall-mount kit (kit also used for ceiling-mounting)
• Screw kit
• Support Contact and Set Up Instruction guide

Setting up the access point

Using your web browser to access and manage your new ARC1000MAP is a very simple process.
1. Power up the access point using the included 12V power adapter.
2. Connect your access point to your PC with an Ethernet cable (not provided).
3. Configure your PC/laptop IP address.
4. Launch your supported web browser and type in the IP address of the unit which is 192.168.1.10.
5. Enter the username admin and password admin.
ARC1000MAP User's Manual
3