Table of Contents
Advertisement
3. Once the file is selected, click Upgrade to apply the new firmware file. After clicking Upgrade, there will be a secondary window
describing the upgrade progress.
4. Click Confirm to start the upgrading process.
Note
By clicking Upgrade and Confirm, the upgrade process will start.
The upgrade process will take a few minutes and progress will be displayed on the GUI screen. During this period, the AP cannot
be accessed. Do not turn off the AP power during the upgrade process. Once the upgrade process is complete, the AP will
automatically restart.
Figure 1.32: Upgrade firmware using HTTP
ARC1000MAP User's Manual
32
Hide quick links:
Advertisement
Table of Contents
