AT&T activeARC ARC1000MAP Configuration Manual page 14

Menu/label
Basic settings
Status
Advanced Configuration
Services
Maintenance
Sub-menu label
Interfaces
Transmit/Receive
Client associations
Ethernet settings
Wireless settings
Radio
VAP
Modes of AP
Web server
NTP
Configuration
Upgrade
ARC1000MAP User's Manual
Description
Shows the IP address, hardware version, firmware version,
MAC address, and device information. The administrator
password, serial ports configuration, and System Settings
can also be configured.
Shows the real-time wired and wireless configuration of the
AP.
Shows the virtual AP-enabling situation and the statistic of
sending and receiving packets of the AP.
Shows the information of sending and receiving packets of
the terminal, which has been associated with the AP.
Configures the related wired configuration of the AP,
including host name, management VLAN, untagged VLAN,
connection type (DHCP/Static IP selection), and DNS server.
Configures the related wireless configuration of the AP,
including country code, RF switch, wireless mode, and
channel.
Configures the detailed RF parameters, including RF switch,
wireless mode, channel, channel bandwidth, primary channel,
supporting short protection interval, STBC mode, protection,
beacon frame interval, DTIM interval, fragment threshold,
RTS threshold, maximum associated terminals number
(maximum stations), transmission power, multicast rate, and
supported rate.
Configures the authentication mode of the virtual AP and the
related configuration.
Configures the modes and IP address of the AP.
Configures the http server status, HTTP server port,
maximum number of users, and timeout of the page.
Configures the NTP server status, NTP server IP address, and
NTP update interval.
Restarts the AP and restores it to factory configuration;
imports and exports files.
Upgrades firmware of the AP.
10