Explanation; Transmit/Receive; Access Point Information Status - AT&T activeARC ARC1000MAP Configuration Manual

Explanation

Click Edit to link to the wired and wireless configuration page.

Transmit/Receive

Access Point information status

Access Point Information Status shows the physical ports and the status of the virtual AP.
Item Description
Interface The name of Ethernet port or VAP port.
Status This shows the current status of the
networked device. It shows 'up' for on and
'down' for off.
MAC Address MAC address of the specific port (interface).
Every interface of the AP has the unparalleled
MAC address. Each RF interface has a
different MAC address.
VLAN ID VLAN number (VLAN ID). You can use VLAN
to create multiple internal and customer
networks on the same AP.
Name (SSID) Wireless network name, also named SSID,
which indicates the WLAN.
Item Description
Interface The name of the Ethernet port or VAP port.
Total Packets Displays the number of the packets that the AP sent (in the sending packet table) or received (in the receiving packet
table).
Total Bytes Displays the number of the bytes that the AP sent (in the sending packet table) or received (in the receiving packet
table).
Total Dropped Packets Displays the number of the sent (in the sending packet table) or received (in the receiving packet table) packets that
the AP dropped.
Total Dropped Bytes Displays the number of the sent (in the sending packet table) or received (in the receiving packet table) bytes that the
AP dropped.
Errors Displays the total number of errors the AP sent or received.
ARC1000MAP User's Manual
Figure 1.9: Transmitting/Receive tab in web management
14