Tyre Pressures; Replacement Tyres; Ignition Switch/Steering Lock - Triumph Street Twin Owner's Handbook Manual

General Information

Tyre Pressures

Warning
The tyre pressure monitoring system is
not to be used as a tyre pressure
gauge when
pressures. For correct tyre pressures,
always check the tyre pressures when
the tyres are cold using an accurate
tyre pressure gauge (see page 144).
Use of the TPMS system to set
inflation pressures
incorrect tyre pressures leading to loss
of motorcycle control and an accident.
The tyre pressures shown on your
instrument panel indicate the actual
tyre pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tyres
are cold because tyres become warmer
during riding, causing the air in the tyre
to expand and the inflation pressure to
increase. The cold inflation pressures
specified by Triumph take account of
this.
Only adjust tyre pressures when the
tyres are cold using an accurate tyre
pressure gauge (see page 121). Do not
use the tyre pressure display on the
instruments.

Replacement Tyres

When replacing tyres, always have an
authorised Triumph dealer fit your tyres
and make sure they are aware that tyre
pressure sensors are fitted to the
wheels.
46
adjusting the
may lead

Ignition Switch/Steering Lock

For reasons of security and safety,
always turn the ignition to the OFF or
tyre
PARK position and remove the key
when
unattended.
Any unauthorised
motorcycle may cause injury to the
user, other road users and pedestrians
to
and may also cause damage to the
motorcycle.
With the key in the LOCK or P position
the steering will become locked.
Never turn the key to the LOCK or P
positions
moving as this will cause the steering
to lock. Locked steering will cause loss
of motorcycle control and an accident.
3
4
5
1. Ignition switch/Steering lock
2. ON position
3. OFF position
4. LOCK position
5. PARK position
Warning
leaving the
use
Warning
while the motorcycle
motorcycle
of the
is
2
1