Maintenance And Adjustment
Clutch
2
cinn
1.
Clutch lever
2.
2 - 3 mm
The motorcycle is equipped with a
cable‑operated clutch.
If the clutch lever has excessive free
play, the clutch may not disengage fully.
This will cause difficulty in changing
gear and selecting neutral. This may
cause the engine to stall and make the
motorcycle difficult to control.
Conversely, if the clutch lever has
insufficient free play the clutch may not
engage fully, causing the clutch to slip,
which will reduce performance and
cause premature clutch wear.
Clutch lever free play must be checked
in
accordance
maintenance requirements.
98
1
with
scheduled
Clutch Inspection
Check that there is 2 ‑ 3 mm clutch
lever free play at the lever.
If there is an incorrect amount of free
play, adjustments must be made.
Clutch Adjustment
Turn the adjuster sleeve until the
correct amount of clutch lever free play
is achieved.
If correct adjustment cannot be made
using the lever adjuster, use the cable
adjuster at the lower end of the cable.
Loosen the adjuster lock nut.
Turn the outer cable adjuster to give
2 ‑ 3 mm of free play at the clutch lever.
Tighten the lock nut to 3.5 Nm.