Right Handlebar Switches - Triumph Street Twin Owner's Handbook Manual

General Information
In addition to operating the ignition
switch/steering lock, the ignition key is
required to operate the seat lock and
fuel tank cap.
When the motorcycle is delivered from
the factory, two ignition keys are
supplied together with a small tag
bearing the key number. Make a note of
the key number and store the spare key
and key number tag in a safe place
away from the motorcycle.
A transponder is fitted within the
ignition keys to turn off the engine
immobiliser. To
immobiliser functions correctly, always
have only one of the ignition keys near
the ignition switch. Having two ignition
keys near the switch may interrupt the
signal between the transponder and the
engine immobiliser. In this situation the
engine immobiliser will remain active
until one of the ignition keys is removed.
Always get replacement keys from your
authorised Triumph dealer. Replacement
keys must be
motorcycle's immobiliser
authorised Triumph dealer.
48
make sure the
'paired' with the
by your

Right Handlebar Switches

Street Twin, Street Cup,
Street Scrambler and Thruxton R
2
3
4
cite
1. Engine start/stop switch
2. STOP position
3. RUN position
4. START position
5. Hazard warning light switch
Thruxton, Bonneville T100 and
Bonneville T120
1
6
cjai
1. Engine start/stop switch
2. STOP position
3. RUN position
4. START position
5. MODE button (Thruxton and
Bonneville T120 only)
6. Hazard warning light switch
1
5
2
3
4
5