Tyre Pressure Monitoring System (Only On Models Fitted With Tpms) - Triumph Street Twin Owner's Handbook Manual

Motorcycle
Hide thumbs Also See for Street Twin:
Table of Contents

Advertisement

Warning
When replacement tyres or inner tubes
are required, consult your authorised
Triumph dealer who will arrange for the
tyres and inner tubes to be selected, in
a
correct
combination,
approved list and fitted according to
the tyre and inner tube manufacturer's
instructions.
When tyres and inner tubes are
replaced, allow time for the tyres and
inner
tubes
to
(approximately 24 hours). During this
seating period, ride cautiously as an
incorrectly seated tyre or inner tube
could
cause
instability,
motorcycle control and an accident.
Initially, the new tyres and inner tubes
will not produce the same handling
characteristics as the worn tyres and
inner tubes and the rider must allow
adequate
riding
(approximately 100 miles (160 km)) to
become
accustomed
handling characteristics.
24
hours
after
pressures
must
adjusted, and the tyres and inner
tubes examined for correct seating.
Rectification must be carried out as
necessary.
The
adjustments must also be carried out
when 100 miles (160 km) have been
travelled after fitting.
Use of a motorcycle with incorrectly
seated tyres or inner tubes, incorrectly
adjusted tyre pressures, or when not
accustomed
to
characteristics may lead to loss of
motorcycle control and an accident.
from
the
seat
to
the
rim
loss
distance
to
the
new
fitting,
the
tyre
be
checked
and
same
checks
and
its
handling
Maintenance And Adjustment
Tyre Pressure Monitoring System
(Only on models fitted with TPMS)
An adhesive label is fitted to the wheel
rim to indicate the position of the tyre
pressure sensor. Care must be taken
when replacing the tyres to prevent
any damage to the tyre pressure
sensors. Always have your tyres fitted
by your authorised Triumph dealer and
inform
them
sensors are fitted to the wheels.
of
Do not use anti puncture fluid or any
other item likely to obstruct air flow to
the
TPMS
blockage to the air pressure orifice of
the TPMS sensor during operation will
cause the sensor to become blocked,
causing irreparable damage to the
TPMS
sensor
caused by the use of anti puncture
fluid or incorrect maintenance is not
considered a manufacturing defect and
will not be covered under warranty.
Always have your tyres fitted by your
authorised Triumph dealer and inform
them that tyre pressure sensors are
fitted to the wheels.
Caution
that
tyre
pressure
Caution
sensor's
orifices.
assembly.
Damage
Any
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents