OPTIONS INSTALLATION
FLEXIBLE DISK DRIVE
This computer operates with a maximum of two integrated drives in
the system and Drive A must be a flexible disk drive. The other drive
may be either another flexible disk drive or a fixed disk drive.
The procedure for installing the flexible disk drive is
straightforward. Carefully read the instructions in the preparations
section at the beginning of this chapter and heed the WARNING and
CAUTIONS, then proceed as follows:
1. Remove the top cover; refer to the cabinet disassembly section in
the front of this chapter.
2. If you are adding a drive to an empty slot, remove the snap-out
face plate (escutcheon) from the drive slot front (see Figure 3-31).
3. If you are replacing a drive, refer to the drive removal section
later in this chapter.
3-28
OWNER S MANUAL