Cable Routing From The I/O Board; Terminal Configured With A Dvd-Rom Drive - NCR RealPOS 70XRT User Manual

Cable Routing from the I/O Board

There are two ways to secure the cables from the I/O Board.
•
•

Terminal Configured with a DVD-ROM Drive

If configured with a DVD the cables are routed in the two channels in the bottom of
the Base. Route the cables in the channels and under the closed pivoting latches.
Secure the cables to the anchor points using Tie Wraps as necessary.
With DVD‐ROM Drive
Without DVD‐ROM Drive
Cable Tie Wrap Anchor Points
Chapter 2: Installing the Terminal
Cable Guide
2-9
26122