Monochrome Monitor Adapter Board - NCR PC4i Owner's Manual

7. If you plan to save the board for future use, put the board back in
the antistatic plastic bag it came in to protect it from dust and
static. If you are removing the board temporarily to get at the
MPB, set it aside out of the way.
Monochrome Monitor Adapter Board (Freestanding Display)
You can add a freestanding display when you install the Monochrome
Monitor Adapter Board. This adapter board is used to drive a
freestanding monochrome display but it is not suitable for connection
to the integrated display of your personal computer.
You activate the option when you reset the switches in the first switch
block SW1 (see Figure 3-10). The switches 5 and 6 on the SW1 block
indicate the type of monitor. Using a ball-point pen, or a similar
object, set switches 5 and 6 to OFF to use a monochrome display (see
Figure 3-11). Leave the remaining switches set as they are.
OWNER S MANUAL
OPTIONS INSTALLATION
3-9