Connections - NCR PC4i Owner's Manual

CONNECTIONS

Connect your unit in the following sequence:
1. Plug the keyboard cable into the computer at the rear {see Figure
2-3).
2. Plug the power cord into the computer at the rear (see Figure 2-4).
3. Plug the power cord into a grounded wall outlet.
4. If you have a printer, connect it according to the instruction
booklet furnished with it and to the Option Installation chapter
in this manual. (NOTE: Many printer types cause vibration on the
work surface, so you may want to either set your printer on a
separate surface, or on a soft pad to absorb the vibrations.)
OWNER S MANUAL
Figure 2-2 Power Switch
READY — SET— GO
Power
Switch
2-3