Flexible Disk Drive (Main Menu Selection 4) - NCR PC4i Service Manual

LEITEL 1
DIAGNOSTICS
FLEXIBLE DISK DRIVE (MAIN MENU SELECTION 4)
When selection number "4" is chosen from the main
menu screen, the Flexible Disk Drive test menu screen
is displayed:
The NCR Personal Computer
Copyright 1984
1
1995 NCR Corp.
FLEIIBLE DISK DRIVE
Nu1ber of Drives = 02
Available Selections
Read Only tests on available drives
I Drive A
2 Drive B
l Drive C
4 Drive D
Read/wri le tests on Available Drives
5 Drive A
6 Drive B
7 Drive C
B Drive D
Note: To insure proper aper ati on under all condi ti ans, run the disk speed test
in the utilities section of the 11ain Henu,
<Fl> Explanation of Selections
<F2> Ter11inate Test Hodule
Press selection and <Enter> for running test once DR
Press selection and <FB> for continuous run of selection (<F4> to stop)
SELECTION
=>
Each of the eight available tests is selected by
entering the corresponding number ( 1 through 8). If
the <F8> key is pressed after the number for a
specific test is selected, that test is run
continuously until <F4> is pressed. If the ENTER key
is pressed after the number for a specific test is
selected, the test runs one time and stops.
When
<F2>
is pressed, the program returns to the main menu.
Flexible Disk DriYe Test HELP Screen
To obtain more information about the available
flexible disk drive tests, press <F1> to see the HELP
screen:
4-28