Main Processor Board (Mpb) - NCR PC4i Owner's Manual

OPTIONS INSTALLATION
NOTE: Make sure the cables connecting the assembly to the
computer are not crimped.
2. Turn the screw-lock clockwise to secure the rack into position.
3. Install any peripheral device cables to the appropriate connector
at the back of the card rack assembly.

MAIN PROCESSOR BOARD (MPB)

A layout of the MPB illustrates the location of the switches that may
require adjustments when an option is installed (see Figure 3-3). The
MPB is mounted vertically in the card rack wall (see Figure 3-4).
3-4
OWNER'S MANUAL