UP-308FEW / UP-316FEW
Loopback Detection
Under some conditions, incorrect connection to wrong ports may cause a network loop. The
unknown broadcast and multicast may crash the whole network. The Loopback Detection
feature can help to prevent this type of situation.
Loopback Detection Function: Enable / Disable the Loopback Detection function.
The default setting is Disable.
Auto Wake Up: Enable / Disable the Auto Wake Up function. The default setting is Disable.
When the Loopback Detection function is running, the ports could be disabled to avoid the
loop. The Auto Wake Up function activates the port after Wake-Up Time Interval passed.
Wake-Up Time Interval: Select the time interval here. The default is 10 sec.
Click Submit to apply the settings.
User Manual
40