Table of Contents
Advertisement
UP-308FEW / UP-316FEW
Firmware Update
This page allows to update the firmware of the switch.
To execute the firmware update, you should enter the password in both Password and
Reconfirm fields, and then click Update.
The pop-up warning window will appear for making sure you want to proceed the firmware
updating procedure. Confirm to proceed the update.
The switch will erase the current firmware from its flash memory. Note. There is a self-
protection mechanism in the Boot Loader. Even if the power is turned off or the cable link fails
during the firmware update procedure, the Boot Loader will restore the code to firmware
update page.
Then another page will appear to select the firmware image file for upload. Click Browse to
select the file, and then click Update to continue the firmware updating procedure.
Upon completion of the firmware update, click Continue to reboot the switch and re-login.
Reboot device
This page is used to reboot the switch. Click Confirm to reboot.
User Manual
14
Advertisement
Table of Contents
