Upvel UP-308FEW User Manual page 25

After having switched to Tag Based VLAN Mode, the screen changes. On this screen, you
can define and configure Uplink and Downlink ports. These are important since here the
handover between the switches of your network takes place.
Tag Based VLAN Mode
Displays VLAN mode: Port-based / Tag-based VLAN. Here you can also
VLAN Mode
switch back to Port-based VLAN Mode
• Add Tag means the 802.1Q tag will be inserted in the outgoing packet of
the selected port. Use this setting for Up- and Downlink Ports in your VLAN
Tagged Network.
• Don't care means the outgoing packet of the selected port will be kept
Tag Mode original. This is the default setting when starting VLAN configuration. You
should change to either Add or Remove Tag.
• Remove Tag means the 802.1Q tag will be removed from the outgoing
packet of the selected port. Use this setting for network connections to
PCs. Only packets of the VLAN Group the port is a member of will be sent.
User Manual
UP-308FEW / UP-316FEW
25