1. Manuals
  2. Brands
  3. Upvel Manuals
  4. Network Router
  5. UR-101AU
  6. User manual

Upvel UR-101AU User Manual

Adsl/adsl2 firewall modem router
Hide thumbs Also See for UR-101AU:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
UR-101AU
ADSL/ADSL2+ Firewall
Modem Router

Advertisement

Table of Contents
loading

Related Manuals for Upvel UR-101AU

Summary of Contents for Upvel UR-101AU

  • Page 1 User Manual UR-101AU ADSL/ADSL2+ Firewall Modem Router...

  • Page 2: Table Of Contents

    ADSL2+ Combo Modem Router INDEX 1.0 About This Manual ....................... 3 1.1 Document Objectives ......................3 1.2 Product Overview ........................ 3 1.3 Product Description ......................3 2.0 Specification ......................... 4 2.1 LED Meaning ........................5 2.2 Back Panel Connectors ....................... 6 3.0 Hardware Requirements ......................

  • Page 3: About This Manual

    ADSL2+ Combo Modem Router 1.0 About This Manual This manual is developed for users, system managers, network managers, and contains installation, configuration, and operation of the ADSL2+ Combo Router. 1.1 Document Objectives The objectives of this manual are to describe all the initial hardware installation and basic configuration procedure for the ADSL2+ Combo Router.

  • Page 4: Specification

    ADSL2+ Combo Modem Router 2.0 Specification ADSL Standards supported ● Compliant to ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitterless ADSL2), G.992.5 (ADSL2+) for Annex A ● G.lite (G.992.2) with line rate support of up to 1.5Mbps downstream and 512Kbps upstream. ●...

  • Page 5: Led Meaning

    ADSL2+ Combo Modem Router 2.1 LED Meaning Your ADSL2+ Combo Router has indicator lights. Please see below for an explanation of the function of each indicator light. Power indicator Ethernet Active indicator ADSL Link indicator Internet Active indicator USB active indicator Table 1.

  • Page 6: Back Panel Connectors

    ADSL2+ Combo Modem Router 2.2 Back Panel Connectors Table 2 shows the function of each connector and switch of the ADSL2+ Combo Router’s rear panel. Figure 1. illustrate the connectors / Figure 2. illustrate the Power Switch.. Table 2. Function / Description of Connectors Connector Description SWITCH...

  • Page 7: Hardware Requirements

    ADSL2+ Combo Modem Router 3.0 Hardware Requirements To use ADSL2+ Combo Router, please have following hardware / accessories ready. A PC with Pre-installed Ethernet Adapter (Required) 12Vac power adaptor (Included in the package) RJ-45 Ethernet cable (Included in the package) RJ-11cable (Included in the package) 3.1 Setting up the Hardware Environment Note!
  • Page 8 ADSL2+ Combo Modem Router 4.0 Installation & Setup Follow each STEP carefully and only go to the next step once you have completed the previous STEP. Connection of ADSL2+ Combo Router If you have a PSTN telephone line (normal analog line) Connect the router as shown below: Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to ADSL2+ Combo Router's “LAN”...

  • Page 9: Configuration Procedures

    ADSL2+ Combo Modem Router 5.0 Configuration Procedures Before starting the ADSL2+ Combo Router configuration, please kindly configure the PC computer as below, to have automatic IP address / DNS Server. For Windows 98SE / ME / 2000 / XP 1. Click on “Start” -> “Control Panel” (in Classic View). In the Control Panel, double click on “Network Connections”...
  • Page 10 ADSL2+ Combo Modem Router 3. Double click on "Internet Protocol (TCP/ IP)". 4. Check "Obtain an IP address automatically" and “Obtain DNS server address automatically” then click on "OK" to continue. 5. Click "Show icon in notification area when connected" (see screen image in 3.
  • Page 11 ADSL2+ Combo Modem Router For Windows Vista-32/64 1. Click on “Start” -> “Control Panel” -> “View network status and tasks”. 2. In the Manage network connections, click on “Manage network connections” to continue.
  • Page 12 ADSL2+ Combo Modem Router 3. Single RIGHT click on “Local Area connection", then click "Properties". 4. The screen will display the information “User Account Control” and click “Continue” to continue. 5. Double click on "Internet Protocol Version 4 (TCP/IPv4)".
  • Page 13 ADSL2+ Combo Modem Router 6. Check "Obtain an IP address automatically" and “Obtain DNS server address automatically” then click on "OK" to continue.
  • Page 14 ADSL2+ Combo Modem Router For Windows 7-32/64 1. Click on “Start” -> “Control Panel” (in Category View) -> “View network status and tasks”. 2. In the Control Panel Home, click on “Change adapter settings” to continue.
  • Page 15 ADSL2+ Combo Modem Router 3. Single RIGHT click on “Local Area connection", then click "Properties". 4. Double click on "Internet Protocol Version 4 (TCP/IPv4)".
  • Page 16 ADSL2+ Combo Modem Router 5. Check "Obtain an IP address automatically" and “Obtain DNS server address automatically” then click on "OK" to continue.

  • Page 17: Internet Configuration Via Ethernet Port

    ADSL2+ Combo Modem Router 6.0 Internet Configuration via Ethernet Port 1. Please insert the supplied CD into your CD-ROM drive. 2. The CD should auto-start, displaying the window shown in 3. below. If your CD does not start automatically, go to Windows Explorer, Select your CD drive and double click “setup.exe”.
  • Page 18 ADSL2+ Combo Modem Router 4. To configure the device, please click “Configuration”. 5. Please click “Internet Configuration” button to continue.
  • Page 19 ADSL2+ Combo Modem Router 6. Please click “Internet connection” button to continue. 7. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds.
  • Page 20 ADSL2+ Combo Modem Router 8. When the “Information” screen pop-up, please click “OK” button to exit the program. You can now access the Internet!

  • Page 21: Internet Configuration Via Usb Port

    ADSL2+ Combo Modem Router 7.0 Internet Configuration via USB Port For Windows 98SE / ME / 2000 / XP Make sure to power on ADSL2+ Combo Router. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer.
  • Page 22 ADSL2+ Combo Modem Router Please choose your language and then click button to continue. To configure the device, please click “Configuration”.
  • Page 23 ADSL2+ Combo Modem Router Please click “Internet Configuration” to continue. Please click “USB connection” to continue.
  • Page 24 ADSL2+ Combo Modem Router 10. Please click “USB Driver Installation” and wait for about 1 minute. 11. Please choose your language and click “Next “to continue.
  • Page 25 ADSL2+ Combo Modem Router 12. Please click “Next“ to continue. 13. Please select “Typical“ type and then click “Next“ to continue.
  • Page 26 ADSL2+ Combo Modem Router 14. Please click “Next“ to continue. 15. USB Driver installation now You have already plugged in the USB cable so no need to plug it in again as per the screen request!!
  • Page 27 ADSL2+ Combo Modem Router 16. Please click “OK “ to continue. (Only for Windows 98SE or ME version ) 17. Please enter “admin” as User name / “1234” as password, then click “OK”. (Only for Windows 2000 or XP version )
  • Page 28 ADSL2+ Combo Modem Router 18. Open the Webpage of ADSL2+Combo Router at 192.168.1.1 as below. Close this Webpage immediately. (Only for Windows 2000 or XP version ) 19. Click “Finish” to complete the USB driver installation.
  • Page 29 ADSL2+ Combo Modem Router 20. Waiting few seconds and the below screenshot will appear on your screen. Please click “Next” to continue. 21. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds.
  • Page 30 ADSL2+ Combo Modem Router 22. When the “Information” screen pop-up, please click “OK” button to exit the program. You can now access the Internet !
  • Page 31 ADSL2+ Combo Modem Router For Windows XP-64bit Make sure to power on ADSL2+ Combo Router. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer.
  • Page 32 ADSL2+ Combo Modem Router Please choose your language and then click button to continue. To configure the device, please click “Configuration”.
  • Page 33 ADSL2+ Combo Modem Router Please click “Internet Configuration” to continue. Please click “USB connection” to continue.
  • Page 34 ADSL2+ Combo Modem Router 10. Please click “USB Driver installation” to continue. 11. Please click “Next “to continue.
  • Page 35 ADSL2+ Combo Modem Router 12. Please select the option “I accept the terms in the license agreement“ and then click “Next“ to continue. 13. Please click “Next“ to continue.
  • Page 36 ADSL2+ Combo Modem Router 14. Please click “Next“ to continue. 15. Please click “Install“ to continue.
  • Page 37 ADSL2+ Combo Modem Router 16. Please click “Continue Anyway“ to continue. 17. Please click “Continue Anyway“ to continue.
  • Page 38 ADSL2+ Combo Modem Router 18. Click “Finish” to complete the USB driver installation. 19. Waiting few seconds and the below screenshot will appear on your screen. Please click “Next” to continue.
  • Page 39 ADSL2+ Combo Modem Router 20. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds. 21. When the “Information” screen pop-up, please click “OK” button to exit the program.
  • Page 40 ADSL2+ Combo Modem Router For Windows Vista-32bit Make sure to power on ADSL2+ Combo Router. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer.
  • Page 41 ADSL2+ Combo Modem Router The screen will display the information “ User Account Control” and click “ Allow” to continue. Please choose your language and then click button to continue. To configure the device, please click “Configuration”.
  • Page 42 ADSL2+ Combo Modem Router Please click “Internet Configuration” to continue. 10. Please click “USB connection” to continue.
  • Page 43 ADSL2+ Combo Modem Router 11. Please click “USB Driver installation” to continue. 12. Please choose your language and click “Next“to continue.
  • Page 44 ADSL2+ Combo Modem Router 13. Please click “Next“to continue. 14. Please select “Typical“ type and then click “Next“ to continue.
  • Page 45 ADSL2+ Combo Modem Router 15. Please click “Next“ to continue. 16. Please click “Install this driver software anyway“ to continue.
  • Page 46 ADSL2+ Combo Modem Router 17. Please click “Finish“ to complete the USB driver installation. 18. Waiting few seconds and the below screenshot will appear on your screen. Please click “Next” to continue.
  • Page 47 ADSL2+ Combo Modem Router 19. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds. 22. When the “Information” screen pop-up, please click “OK” button to exit the program.
  • Page 48 ADSL2+ Combo Modem Router For Windows Vista-64bit Make sure to power on ADSL2+ Combo Router. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer.
  • Page 49 ADSL2+ Combo Modem Router The screen will display the information “ User Account Control” and click “ Allow” to continue. Please choose your language and then click button to continue. To configure the device, please click “Configuration”.
  • Page 50 ADSL2+ Combo Modem Router Please click “Internet Configuration” to continue. 10. Please click “USB connection” to continue.
  • Page 51 ADSL2+ Combo Modem Router 11. Please click “USB Driver installation” to continue. 12. Please click “Next“ to continue.
  • Page 52 ADSL2+ Combo Modem Router 13. Please check “I accept the terms in the license agreement” and click “Next“ to continue. 14. Please click “Next“ to continue.
  • Page 53 ADSL2+ Combo Modem Router 15. Please select “complete” and click “Next“ to continue. 16. Please click “Install“ to continue.
  • Page 54 ADSL2+ Combo Modem Router 17. Please click “Install this driver software anyway “ to continue. 18. Please click “Finish” to complete the USB driver installation.
  • Page 55 ADSL2+ Combo Modem Router 19. Waiting few seconds and the below screenshot will appear on your screen. Please click “Next” to continue. 20. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds.
  • Page 56 ADSL2+ Combo Modem Router 21. When the “Information” screen pop-up, please click “OK” button to exit the program. You can now access the Internet !
  • Page 57 ADSL2+ Combo Modem Router For Windows 7-32/64bit 1. Make sure to power on ADSL2+ Combo Router. 2. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer.
  • Page 58 ADSL2+ Combo Modem Router 6. The screen will display the information “ User Account Control” and click “ Yes” to continue. 7. Please choose your language and then click button to continue. 8. To configure the device, please click “Configuration”.
  • Page 59 ADSL2+ Combo Modem Router 9. Please click “Internet Configuration” to continue. 10. Please click “USB connection” to continue.
  • Page 60 ADSL2+ Combo Modem Router 11. Please click “USB Driver installation” to continue. 12. Please click “Next“ to continue. If you have already installed the USB driver, please click “Cancel“ to exit the installation of USB driver and it will bring you to step 15.
  • Page 61 ADSL2+ Combo Modem Router 13. Please click “Finish“ to complete the USB driver installation. 14. Once the computer rebooted completely, please repeate steps above and click “Cancel“ on Step 12 to exit the installation of USB driver and go straight to Step 15 below.
  • Page 62 ADSL2+ Combo Modem Router 16. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds. 17. When the “Information” screen pop-up, please click “OK” button to exit the program.

  • Page 63: Configuration Of Iptv Connection

    ADSL2+ Combo Modem Router 8.0 Configuration of IPTV connection For Windows 98SE / ME / 2000 / XP / Vista / 7 Make sure to power on ADSL2+ Combo Route. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer.
  • Page 64 ADSL2+ Combo Modem Router Please insert the supplied CD into your CD-ROM drive. The CD should auto-start, displaying the window shown in 6. below. If your CD does not start automatically, go to Windows Explorer, Select your CD drive and click “setup.exe” Please choose your language and then click button to continue.
  • Page 65 ADSL2+ Combo Modem Router Please click “IPTV Connection” to continue. Please click “USB Driver installation” to continue.
  • Page 66 ADSL2+ Combo Modem Router Please choose your language and click “Next “ to continue. If you want to install the USB Driver to Windows XP 64bit, Vista, 7 system, please refer to page.34 ~ page.38 for Windows XP 64bit, page.43 ~ page.46 for Windows Vista 32bit, page.51 ~ page.54 for Windows Vista 64bit, page.60 ~ page.61 for Windows 7.
  • Page 67 ADSL2+ Combo Modem Router 11. Please select “Typical“ type and then click “Next“ to continue. 12. Please click “Next“ to continue.
  • Page 68 ADSL2+ Combo Modem Router 13. USB Driver installation now You have already plugged in the USB cable so no need to plug it in again as per the screen request!! 14. Please click “OK “ to continue. (Only for Windows 98SE or ME version )
  • Page 69 ADSL2+ Combo Modem Router 15. Please enter “admin” as User name / “1234” as password, then click “OK”...
  • Page 70 ADSL2+ Combo Modem Router 16. Open the Webpage of ADSL2+Combo Router at 192.168.1.1 as below. Close this Webpage immediately. 17. Click “Finish” to complete the USB driver installation.
  • Page 71 ADSL2+ Combo Modem Router 18. Waiting few seconds and the below screenshot will appear on your screen. Make sure that the RJ-45 cable has been connected as below, please click “Next” to continue. 19. Please click “Next“ to continue.
  • Page 72 ADSL2+ Combo Modem Router 20. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds. 21. When the “Information” screen pop-up, please click “OK” button, to configure the Internet setting, or click “Cancel”...
  • Page 73 ADSL2+ Combo Modem Router 22. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds. 23. Please click on “Save configuration” button. When the “Information” screen pop-up, please click “OK”...

  • Page 74: Technology Glossary

    ADSL2+ Combo Modem Router 9.0 Technology Glossary 10Base-T An adaptation of the Ethernet standard for Local Area Network (LAN). 10Base-T uses a twisted pair cable with maximum length of 100 meters. ATM Adaptation Layer that defines the rules governing segmentation and reassembly of data into cells.
  • Page 75 ADSL2+ Combo Modem Router File Transfer Protocol. The Internet protocol (and program) used to transfer files between hosts. IPoA (RFC 1577) Classical IP and ARP over ATM. Considers ATM configured as a Logic IP Sub-network(LIS) to replace Ethernet local LAN segments. Internet service provider.
  • Page 76 ADSL2+ Combo Modem Router RFC 1483 Multi-protocol encapsulation over AAL-5. Two encapsulation methods for carrying network interconnect traffic over ATM AAL-5. The first method allows multiplexing of multiple protocols over a single ATM virtual circuit. The protocol of a carried PDU is identified by prefixing the PDU by an IEEE 802.2 Logical Link Control (LLC) header.

  • Page 77: Introduction Of The Web Configuration

    ADSL2+ Combo Modem Router 10.0 Introduction of the Web Configuration 10.1 Web Configuration Overview The embedded web configuration allows you to manage ADSL2+ Combo Router from anywhere through a browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later versions with JavaScript enabled.
  • Page 78 ADSL2+ Combo Modem Router Quick Start Guide You can use "Quick Start" to setup the router as follows, and the router will connect to the Internet via ADSL line. Click "Quick Start" to get into the quick setup procedures. Click "RUN WIZARD" to start up this procedure.
  • Page 79 ADSL2+ Combo Modem Router Step 1 – Please click "Next" to setup your new administrator's password. Step 2 – Please click "Next" to setup your time zone.
  • Page 80 ADSL2+ Combo Modem Router Step 3 – Please click "Next" to setup your Internet connection type. You can have this information from your Internet Service Provider. Step 4 - Enter the connection information provided by your ISP and click “Next “.
  • Page 81 ADSL2+ Combo Modem Router Step 5 - Enter the connection information provided by your ISP and click “Next “. Step 6 – Please click “CLOSE “ to finish Quick Start.
  • Page 82 ADSL2+ Combo Modem Router System Time Go to Maintenance->Time Zone and select system time as you wish. Connecting to a Simple Network Time Protocol (SNTP) server allows the router to synchronize the system clock to the global Internet. The synchronized clock in the router is used to recorded the security log and control client filtering. Admin Setting Go to Maintenance->...
  • Page 83 ADSL2+ Combo Modem Router Firmware Update Go to Maintenance -> Firmware to upgrade the firmware. The new firmware for your router can improve functionality and performance. Enter the path and name of the upgrade file then click the UPGRADE button below. You will be prompted to confirm the upgrade.
  • Page 84 ADSL2+ Combo Modem Router System Reset Go to Maintenance -> SysRestart to restart your system.In the event that the router stops responding correctly or in some way stops functioning, you can perform a reset. Your settings will not be changed. To perform the reset, select "Current Setting" and click on the "RESTART" button below.
  • Page 85 ADSL2+ Combo Modem Router ADSL Status Go to Status->Device Info. The 'ADSL Line Status' enables you to check the status of your ADSL connection including how fast data is being transferred.
  • Page 86 ADSL2+ Combo Modem Router ADSL Statistics Go to Status-> Statistics and select ADSL interface. You can see the traffic Statistics of ADSL interface. VC Configuration Go to Interface Setup -> Internet. To add or delete ADSL VC configuration, these information provide by ISP.
  • Page 87 ADSL2+ Combo Modem Router WAN Configuration Go to Interface Setup -> Internet. The router can be connected to your service provider in any of the following ways. Dynamic IP Address: Obtain an IP address automatically from your service provider. Static IP Address: Uses a static IP address. Your service provider gives a static IP address to access Internet services.
  • Page 88 ADSL2+ Combo Modem Router WAN Status Go to Status -> Device Info and select the Virtual Circuit to see the connection status.
  • Page 89 ADSL2+ Combo Modem Router Go to Interface -> LAN to enable DHCP server. Then you can set DNS server for the router. A Domain Name system (DNS) server is like an index of IP addresses and Web addresses. If you type a Web address into you browser, a DNS server will find that name in its index and find the matching IP address.
  • Page 90 ADSL2+ Combo Modem Router DDNS Go to Access Management -> DDNS to setup your DDNS parameters. Dynamic DNS allows you to update your dynamic IP address with one or many dynamic DNS services. So anyone can access your FTP or Web service on your computer using DNS-like address.
  • Page 91 ADSL2+ Combo Modem Router CWMP Item Name Description CWMP Enable or Disable TR069 function Type ACS server’s URL User Name Type ACS server login username Password Type ACS server login password Path Type the path for Connection request Port Type the port for Connection request Username Type username for ACS server to make connection request Password...
  • Page 92 ADSL2+ Combo Modem Router LAN Configuration Go to Interface Setup -> LAN. The 'LAN Settings' option enables you to configure the LAN port. If the DHCP Relay is selected, the DHCP requests from local PCs are forward to the DHCP server runs on WAN side.
  • Page 93 ADSL2+ Combo Modem Router IP Filtering Go to Access Management -> IP Filtering to block some packets form WAN.The router provides extensive firewall protection by restricting connection parameters to limit the risk of intrusion and defending against a wide array of common hacker attacks. The user can set different IP filter rules of a given protocol(TCP, UDP or ICMP) and a specific direction(incoming, outgoing, or both) to filter the packets.
  • Page 94 ADSL2+ Combo Modem Router ACL Setting Go to Access Management -> ACL to enable remote management. The user may remotely access the ADSL Router once setting his IP as a Secure IP Address through selected applications. With the default IP 0.0.0.0, any client would be allowed to remotely access the ADSL Router. NAT Setting Go to Advanced Setup->NAT to setup the NAT features.
  • Page 95 ADSL2+ Combo Modem Router Virtual Server Go to Advanced Setup ->NAT -> Virtual Server to set virtual server as you need.(known as Port Mapping).You can configure the router as a virtual server so that remote users accessing services such as the Web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses.
  • Page 96 ADSL2+ Combo Modem Router DMZ Setting Go to Advanced Setup ->NAT -> DMZ to set DMZ parameters. If you have a local client PC that cannot run an Internet application properly from behind the NAT firewall, you can open the client up to unrestricted two-way Internet access by defining a virtual DMZ Host.
  • Page 97 ADSL2+ Combo Modem Router Dynamic Routing Go to Interface Setup -> Internet to select Dynamic Route as you need. The dynamic routing feature of the router can be used to allow the router to automatically adjust to physical changes in the network's layout. The router uses the dynamic RIP protocol. It determines the route that the network packets take based on the fewest number of hops between the source and the destination.
  • Page 98 ADSL2+ Combo Modem Router Routing Table Go to Advanced Setup -> Routing to see the Routing Table.The Routing table allows you to see how many routings on your routing table and interface information System Status Go to Status -> Device Info to see the router's information. The System Status page shows the WAN, LAN and the router's firmware version.
  • Page 99 ADSL2+ Combo Modem Router SNMP Go to Access Management -> SNMP to setup SNMP feature.Simple Network Management Protocol is used for exchanging information between network device. Get Community : Select to set the password for the incoming Get- and GetNext requests from the management station.
  • Page 100 ADSL2+ Combo Modem Router QoS Setting Go to Advanced Setup -> QoS to setup QoS features. This option will provide better service of selected network traffic over various technologies.
  • Page 101 ADSL2+ Combo Modem Router VLAN Go to Advanced Setup -> VLAN to enable VLAN features. Virtual LAN (VLAN) is a group of devices on one or more LANs that are configured so that they can communicate as if they were attached to the same wire, when in fact they are located on a number of different LAN segments.
  • Page 102 ADSL2+ Combo Modem Router VLAN Group Go to Advanced Setup -> VLAN-> Define VLAN Group to setup VLAN group features. Firewall Go to Advanced Setup ->Firewall to setup Firewall features. Select this option can automatically detect and block Denial of Service (DoS) attacks, such as Ping of Death, SYN Flood, Port Scan and Land Attack.

  • Page 103: Universal Plug And Play Overview

    ADSL2+ Combo Modem Router 11.0 Universal Plug-and-Play (UPnP) 11.1 Universal Plug and Play Overview Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network.

  • Page 104: Configuring Upnp

    ADSL2+ Combo Modem Router 11.5 Configuring UPnP From the Site Map in the main menu, click UPnP under Access Managemen to display the screen shown next. The following table describes the labels in this screen. LABEL DESCRIPTION UPnP Select this checkbox to activate UPnP. Be aware that anyone could use a UPnP application to open the web configuration's login screen without entering ADSL2+ Combo Router's IP address (although you must still enter...

  • Page 105: Installing Upnp In Windows Example

    ADSL2+ Combo Modem Router 11.6 Installing UPnP in Windows Example This section shows how to install UPnP in Windows Me and Windows XP. 11.7 Installing UPnP in Windows Me Follow the steps below to install the UPnP in Windows Me. Step 1.

  • Page 106: Installing Upnp In Windows Xp

    ADSL2+ Combo Modem Router 11.8 Installing UPnP in Windows XP Follow the steps below to install the UPnP in Windows XP. Step 1. Click Start and Control Panel. Step 2. Double-click Network Connections. Step 3. In the Network Connections window, click Advanced in the main menu and select Optional Networking Components ….

  • Page 107: Using Upnp In Windows Xp Example

    ADSL2+ Combo Modem Router 11.9 Using UPnP in Windows XP Example This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP installed in Windows XP and UPnP activated on ADSL2+ Combo Router. Make sure the computer is connected to a LAN port of ADSL2+ Combo Router.
  • Page 108 ADSL2+ Combo Modem Router Step 4. You may edit or delete the port mappings or click Add to manually add port mappings. Step 5. Select Show icon in notification area when connected option and click OK. An icon displays in the system tray Step 6.

  • Page 109: Web Configuration Easy Access

    ADSL2+ Combo Modem Router 12.0 Web Configuration Easy Access With UPnP, you can access the web-based configuration on ADSL2+ Combo Router without finding out the IP address of ADSL2+ Combo Router first. This comes helpful if you do not know the IP address of ADSL2+ Combo Router.
  • Page 110 ADSL2+ Combo Modem Router Step 6. Right-click on the icon for yourADSL2+ Combo Router and select Properties. A properties window displays with basic information about ADSL2+ Combo Router.

  • Page 111: Troubleshooting

    ADSL2+ Combo Modem Router 13.0 Troubleshooting A.1 Using LEDs to Diagnose Problems The LEDs are useful aides for finding possible problem causes. A.1.1 Power LED The PWR LED on the front panel does not light up. STEPS CORRECTIVE ACTION Make sure that ADSL2+ Combo Router’s power adaptor is connected to ADSL2+ Combo Router and plugged in to an appropriate power source.

  • Page 112: Telnet

    ADSL2+ Combo Modem Router A.2 Telnet I cannot telnet into ADSL2+ Combo Router. STEPS CORRECTIVE ACTION Check the LAN port and the other Ethernet connections. Make sure you are using the correct IP address of ADSL2+ Combo Router. Check the IP address of ADSL2+ Combo Router. Ping ADSL2+ Combo Router from your computer.

  • Page 113: Login Username And Password

    ADSL2+ Combo Modem Router A.4 Login Username and Password I forgot my login username and/or password. STEPS CORRECTIVE ACTION If you have changed the password and have now forgotten it, you will need to upload the default configuration file. This will erase all custom configurations and restore all of the factory defaults including the password.

  • Page 114: Internet Access

    ADSL2+ Combo Modem Router A.7 Internet Access I cannot access the Internet. STEPS CORRECTIVE ACTION Make sure ADSL2+ Combo Router is turned on and connected to the network. If the DSL LEDs are off, refer to Section A.1.3. Verify your WAN settings. Make sure you entered the correct user name and password.

Table of Contents