Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Upvel UR-104AN
Summary of Contents for Upvel UR-104AN
-
Page 2: Table Of Contents
CONTENTS Product overview ....................3 Package contents ....................4 Status LEDs ......................4 LEDs description ....................5 Ports and buttons functionality................6 Router Installation ....................7 Configuring your router with Setup Wizard ............. 9 Connecting to the Internet via ADSL ..............11 Connecting to the Internet via Ethernet ............. -
Page 3: Product Overview
Product overview UR-104AN 4 ports ADSL2/2+ Router 10/100 Mbps Ethernet, IPTV and Ipv6 support UR-314AN Wireless N 4 ports ADSL2/2+ 150 Mbps 802.11n Wi-Fi, 10/100 Router 1x1 Mbps Ethernet, IPTV and Ipv6 support Wireless N 4 ports ADSL2/2+ 3G/4G, 150 Mbps 802.11n Wi-Fi,... -
Page 4: Package Contents
UPVEL ADSL Modem Router Package contents • ADSL2+ Modem Router • Quick Installation guide • CD-ROM (Utility and User’s Guide) • Power Adapter (please go to page 63 for specifications) • Network Cable (Twisted Pair Cat5 1,5m/5ft) • Telephone cable (x2) •... -
Page 5: Leds Description
WLAN Wireless unit Data is being Wireless unit (all except is on transmitted is of UR-104AN) Waiting for WPS function to be activated on the WPS function is not (all except – remote device you being used UR-104AN) -
Page 6: Ports And Buttons Functionality
UPVEL ADSL Modem Router Ports and buttons functionality POWER Power cable port SWITCH Power On/Off button (all except Wi-Fi Protected Setup activation UR-104AN) WiFi (all except Wireless unit activation/deactivation UR-104AN) (UR-344AN4G, Port to connect 3G/4G modem or external hard drive UR-344AN4G+ &... -
Page 7: Router Installation
Router Installation... - Page 8 UPVEL ADSL Modem Router If you connect to the Internet via ADSL: Using the network cable from the package, connect your computer to LAN2 or LAN3 port of the router. LAN4 port is for IPTV receiver connection. Disconnect the phone cable from the outlet and connect in to the PHONE port of the splitter.
-
Page 9: Configuring Your Router With Setup Wizard
3. Click Start configuration wizard button. 4. Please select your language. 5. In the following window click Configure your router. Note. Upvel recommends to upgrade the Setup Wizard to the latest version before connecting and configuring the router. If Internet connection is established utility will update automatically. - Page 10 UPVEL ADSL Modem Router 6. Establish all the connections according instructions window represented to the right and click Next. 7. In the following window please click Next.
-
Page 11: Connecting To The Internet Via Adsl
Connecting to the Internet via ADSL 1. Please click ADSL modem / WAN / Ethernet button. 2. Enter the data from the agreement with your ISP and click Next. These settings can be clarified at your ISP's support. 3. Please wait until the router setup is completed. -
Page 12: Connecting To The Internet Via Ethernet
UPVEL ADSL Modem Router Connecting to the Internet via Ethernet 1. Please click the WAN/Ethernet button. 2. Select your connection type, enter all the necessary data from the agreement with your ISP and click Next. These settings can be clarified at your ISP's support. -
Page 13: Connecting To The Internet Via 3G/4G
Connecting to the Internet via 3G/4G (UR-344AN4G, UR-344AN4G+ & UR-345AN4G) 1. Please click 3G/4G (LTE) button. 2. Enter the data from the agreement with your ISP and click Next. These settings can be clarified at your ISP's support. 3. Please wait until the router setup is completed. -
Page 14: Wireless Network Configuration
UPVEL ADSL Modem Router Wireless network configuration 1. Please click on Wi-Fi button. 2. Please specify the SSID (your network’s name). 3. Select the encryption type (WPA2-PSK is recommended). 4. Specify the passphrase. 5. Then click Next. 6. Please wait until the wireless setup is... - Page 15 7. Wi-Fi setup is completed. Please click Next. 8. Click button to exit. Congratulations! Your new Router is now operational. You can run the installation CD anytime to make changes to your Router’s settings. Note: You can change additional settings by entering http://192.168.10.1 into your Web browser address line, and enter “admin”...
-
Page 16: Connection To Your Wireless Network
UPVEL ADSL Modem Router Connection to your wireless network Windows Vista, 7 and 8 1. Start ->ControlPanel ->Network and Internet ->Connect to a network 2. Or left-click on network connection button in Windows tray. 3. In the next window choose Wi-Fi network with the name you have specified,... - Page 17 4. Enter the network key you have specified to the input box and click OK.
-
Page 18: Windows Xp
UPVEL ADSL Modem Router Windows XP 1. Click the Start button, then follow to Control Panel. Double-click the Network Connections. 2. Double-click on Wireless Network Connection... - Page 19 3. In the next window choose Wi-Fi network with the name you have specified, and click Connect. 4. Enter the network key you have specified to the both input boxes and click Connect.
-
Page 20: Tips On Wireless Performance Optimization
UPVEL ADSL Modem Router Tips on wireless performance optimization A set of various factors can impact the range of wireless devices. 1. Adjust your wireless devices so that the signal is traveling in a straight path, rather than at an angle. The more material the signal has to pass through the more signal you will lose. -
Page 21: Configuring Your Router Through Web-Interface
Configuring your router through Web-interface Besides using the Configuration Wizard you are able to set up your router using Web-interface. Open your Web browser and go to http://192.168.10.1 Your router will prompt you for a user name and password. Enter the default user name and password and then click Login. Default User Name: admin Default Password: admin... -
Page 22: Quick Installation
UPVEL ADSL Modem Router Quick Installation For quick installation through the router’s web-interface go to the main (Status) page and click Quick Start tab . - Page 23 Then click RUN WIZARD. Click NEXT.
- Page 24 UPVEL ADSL Modem Router Set a new password for admin account. Enter the same password into both boxes and click NEXT. Note: If you ever factory reset your router the default password will revert back to “admin”. Select the appropriate time zone from the dropdown list and click NEXT.
- Page 25 Select the connection type which your ISP uses and click NEXT. If you’re not sure which connection type is yours please contact your ISP’s support.
- Page 27 Dynamic IP address PPPoE/PPPoA If VPI and VCI values are different then the default Enter you username and password into the boxes. If ones please enter the actual values into the boxes. VPI and VCI values are different then the default ones Then please click NEXT.
- Page 28 Please click NEXT and wait a little for your settings to take effect. If you would like to change some settings please click BACK. To discard all the settings and quit the Quick Start Master please click CANCEL. Please click CLOSE to quit.
-
Page 29: Web-Interface Guide
UPVEL ADSL Modem Router Web-interface guide After you enter to 192.168.10.1 with your web-browser you see the home page of your router’s web-interface (Status). Here you are able to overview the state and settings of all the router’s network interfaces as well as the firmware version. -
Page 30: Connecting To The Internet Via Adsl
Connecting to the Internet via ADSL Please go to Interface Setup - Internet. Here you should specify your Internet connection settings according to the agreement with your ISP. In Trasfer Modes menu please select ATM. - Page 31 UPVEL ADSL Modem Router If VPI and VCI values (according to the agreement with the ISP) are different then the default ones please enter the actual values into the boxes. Otherwise leave them unchanged. Connecting with dynamic IP address Leave settings unchanged unless otherwise stated in the agreement with the ISP.
- Page 32 Connecting with static IP address Enter your IP-address, subnet mask and gateway into the boxes. Leave the other settings unchanged unless otherwise stated in the agreement with the ISP. Then click SAVE at the bottom.
- Page 33 UPVEL ADSL Modem Router Connecting by PPPoA/PPPoE protocol with dynamic IP address Enter your username and password into the boxes. Leave the other settings unchanged unless otherwise stated in the agreement with the ISP. Then click SAVE at the bottom.
- Page 34 Connecting by PPPoA/PPPoE protocol with static IP address Enter your username and password as well as your IP-address, subnet mask and gateway into the boxes. Leave the other settings unchanged unless otherwise stated in the agreement with the ISP. Then click SAVE at the bottom.
- Page 35 UPVEL ADSL Modem Router Bridge mode Leave the settings unchanged unless otherwise stated in the agreement with the ISP. Then click SAVE at the bottom.
-
Page 36: Connecting To The Internet Via Ethernet
Connecting to the Internet via Ethernet Please go to Interface Setup - Internet. In Trasfer Modes menu please select Ethernet. Please mind the following settings: Encapsulation. Select the connection type your ISP requires. Note: for instructions on configuring PPTP and L2TP connection please refer to the next chapter. - Page 37 UPVEL ADSL Modem Router...
- Page 38 Connecting to the Internet via L2TP and PPTP If your ISP provides Internet access via PPTP or L2TP protocol, please apply the following settings. Please go to Interface Setup - Internet. • In WAN Transfer Mode select Ethernet; • In Encapsulation Select Dynamic or Static IP Address (depends on the configuration your ISP requires).
- Page 39 UPVEL ADSL Modem Router Then go to Interface Setup - VPN. Select PPTP or L2TP protocol (depends on the configuration your ISP requires) and specify all the necessary settings. • IP - enter the IP address or URL of the VPN server;...
-
Page 40: Connecting To The Internet Via 3G
Connecting to the Internet via 3G Please go to Interface Setup - 3G. To establish Internet connection via 3G/4G modem you should use the settings as stated below: Status: Activated 3G Backup: Enabled Default APN: Yes Leave the other settings unchanged. Then click SAVE at the bottom. -
Page 41: Interface Setup > Lan
UPVEL ADSL Modem Router Interface setup > LAN Here you are able to set one alias IP address for creating an additional logical LAN interface using the same physical one. You are also able to set DHCP reservation function here. You should enter MAC address of a certain device and IP address you want this device to obtain each time it connects your network. -
Page 42: Interface Setup > Wireless
Interface setup > Wireless Here you are able to adjust the settings of a wireless network. The default settings are appropriate for most users. However you can select the other wireless network modes. E.g. if your network does not contain 802.11b and 802.11g devices you can choose 802.11n mode. You can also change the SSID and passkey which is necessary to get access to the wireless network. - Page 43 UPVEL ADSL Modem Router...
-
Page 44: Iptv Setup
IPTV setup To set up your router for co-working with IPTV you should state settings as represented below: Go to Interface setup> Internet. Choose PVC1 virtual channel. For VPI and VCI please use the values depending on your ISP's requirements respectively. For ATM QoS use UBR option. - Page 45 UPVEL ADSL Modem Router Go to Interface setup >LAN. In DHCP menu unmark the checkbox LAN4 (it will be used to connect an IPTV reciever).
- Page 46 Go to Advanced setup >PortBinding. Choose Activated. For group 0 chose ATM VC port 0, Ethernet ports 2, 3, 4 and WLAN port 1. Please click SAVE.
- Page 47 UPVEL ADSL Modem Router Select Group index 1. For Group 1 select ATM VC port 1 and Ethernet port 1. Then click SAVE. IPTV setup is complete.
-
Page 48: Maintenance > Administration
Maintenance > Administration Here you are able to set a new password for admin account. Please enter the same password into both boxes and click SAVE. -
Page 49: Maintenance > Time Zone
UPVEL ADSL Modem Router Maintenance > Time zone Here you are able to set your router to synchronize time and date to NTP-server or to a computer used to enter the router’s web-interface. You may as well set time and date manually. - Page 50 To synchronize to a computer used to enter the router web-interface please select the relevant option and click SAVE. To set time and date manually please select the relevant option, specify time and date and then click SAVE.
-
Page 51: Maintenance > Firmware
UPVEL ADSL Modem Router Maintenance > Firmware Here you are able to update your router’s firmware, save current settings to a file as well as load them. Firmware update Download the latest firmware from www.upvel.com and select tclinux.bin option. Then click Browse, specify a path to the firmware you have downloaded and click Open. -
Page 52: Maintenance > Sysrestart
Maintenance > SysRestart There are two restart options: with current settings saving and with restoring factory default settings. Select what you want and click RESTART. CAUTION! The reboot of the router may take some time. Do not switch off power or remove cables while the file is loaded and firmware is updated! This may result in serious damage to the router and even non repairable hardware failure! After the upgrade router will reboot automatically and require the authorization again. -
Page 53: Status > System Log
UPVEL ADSL Modem Router Status > System Log Here you are able to setup the registration of system events. System logging is activated by default. Select the events from the first dropdown menu to be logged. Select the events from the second dropdown menu to be seen currently (system log configuration). - Page 54 Entries of the log are represented according to a configuration option chosen. To save all the entries to a file please click Savelog, choose the destination in the opening window and click Save.
-
Page 55: Status > Statistics
UPVEL ADSL Modem Router Status > Statistics Here you can overview statistics on incoming and outgoing traffic for each of router’s interfaces. -
Page 56: Possible Troubles While Connecting And Configuring The Router
Autorun.exe icon and left-click to Run as Administrator. 3. If you have no configuration CD please connect to the Internet without the router. Open your Web-browser, go to http://www.upvel.com/support/upvel-master.html and download the Configuration Wizard. Then connect the router according to this User Manual and launch the Configuration Wizard from your computer. -
Page 57: Setting Up Your Network Adapter
UPVEL ADSL Modem Router Appendix 2 Setting up your network adapter Before the router setup starts, please make sure your network adapter is set to automatic IP and DNS obtain. Follow the instruction below. For Windows Vista, 7 and 8 1. - Page 58 2. In the next window click Change Adapter Settings (or Manage network connections in Windows Vista). 3. Then please right-click the Local Area Connection icon and then click Properties.
- Page 59 UPVEL ADSL Modem Router 4. In Local Area Connection – Properties window click Internet Protocol Version 4(TCP/IPv4) and then click Properties. 4. Click on Obtain an IP address automatically and Obtain DNS server address automatically. Then click on OK.
-
Page 60: For Windows Xp
For Windows XP 1. Click the Start button, then follow to Control Panel. Double-click the Network Connections icon. - Page 61 UPVEL ADSL Modem Router 2. In the following window please right-click the Local Area Connection icon and then click Properties.
- Page 62 3. In Local Area Connection Properties window click Internet Protocol (TCP/IP) and then click Properties.
- Page 63 UPVEL ADSL Modem Router 4. Click on Obtain an IP address automatically and Obtain DNS server address automatically. Then click on OK.
-
Page 64: For Mac Os X
For Mac OS X 1. Please click on System Preferences... - Page 65 UPVEL ADSL Modem Router 2. Then click on Network.
- Page 66 3. Choose the Ethernet interface, in Configure IPv4 menu select Using DHCP and then click Apply.
-
Page 67: Specification
UPVEL ADSL Modem Router Appendix 3 Specification Ethernet • IEEE 802.3i 10Base-T • IEEE 8023u 100Base-TX Wi-Fi (all except UR-104AN) • IEEE 802.11n • IEEE 802.11g • IEEE 802.11b ADSL Standards • ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), G.992.4 (splitterless ADSL2), G.92.5 (ADSL2+) Annex A... - Page 68 • FTP and SAMBA support • Reset: factory settings restoring • WPS: connecting to your wireless network with Wireless Protected Setup function (all except UR-104AN), factory settings restoring when is being Buttons pushed for 20 seconds. • Wi-Fi: onboard wireless unit enabling/disabling (all except UR-104AN) •...
- Page 69 UPVEL ADSL Modem Router Wireless connection (all except UR-104AN) • IEEE 802.11n • IEEE 802.11g Standards • IEEE 802.11b • 802.11b: DSSS (PBCC, CCK, DQPSK, DBPSK) • 802.11g: OFDM Modulation • 802.11n: OFDM 64-QAM • 80211b: 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps •...
-
Page 70: Fcc Statement
FCC/CE Disclaimer FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 71: Ce Mark Warning
UPVEL ADSL Modem Router CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National restrictions This device is intended for home and office use in all EU countries (and other countries following... -
Page 73: Gpl/Lgpl Information
("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. UPVEL does not provide technical support for these codes. The details of the GNU GPL and LGPL are included in the product CD-ROM. Please also go to (http://www.gnu.org/licenses/gpl.txt) or (http://www.gnu.org/licenses/lgpl.txt) for specific terms of... - Page 74 Исходный код программ доступен для загрузки с веб-сайта UPVEL (http://www.upvel.com/downloads/gpl) в течение, как минимум, трех лет со дня поставки продукта. Кроме того, исходный код можно запросить по адресу UPVEL. 13139 Ramona Blvd., Irwindale, CA 91706, USA. Tel: +1-626-337-0162 Fax: +1-626-337-0167.
- Page 75 Please take a moment to register your new UPVEL product online: Go to www.upvel.com/registration UPVEL Irwindale, CA USA www.upvel.com Toll Free Support Hotline USA/Canada: 1 (800) 457-3811 UPVEL is a registered Trademark. All other trademarks belong to their respective proprietors. Designed in USA / Assembled in China...