Related Manuals for Upvel UR-101AU
Summary of Contents for Upvel UR-101AU
- Page 1 ADSL2+ Combo Modem Router Quick Installation Guide UR-101AU ADSL/ADSL2+ Firewall Modem Router...
-
Page 2: System Requirement
ComTW263R4 ADSL2+ Combo Router System Requirement Pentium 200 MHz processor or above Windows 98SE, Windows Me, Windows 2000, Windows XP, Windows Vista and Windows 7. 64 MB of RAM or above 25 MB free disk space Package Contents For Annex-A ADSL2+ Combo Router ADSL2+ Combo Router CD-ROM (Software &... -
Page 3: Installation And Setup
ADSL2+ Combo Modem Router Installation & Setup LAN Connection: Connect an Ethernet cable from your PC's Ethernet port to ADSL2+ Combo Router's LAN Port. WAN Connection: Connect the telephone cable from your home's telephone jack to the telephone port (LINE) of the ADSL2+ Combo Router, if there is no Splitter applied. - Page 4 ComTW263R4 Connection of ADSL2+ Combo Router If you have a PSTN telephone line (normal analog line) connected the router as shown below: (Annex-A ADSL2+ Combo Router) **Use the “ATF085A1R” Annex-A Splitter (Optional) Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to ADSL2+ Combo Router's “LAN”...
-
Page 5: Led Meaning
ADSL2+ Combo Modem Router Connect a RJ11 telephone cable to the “PHONE” port of the splitter and connect the other end to your telephone. Connect the power adapter to the power inlet “POWER” of the ADSL2+ Combo Router and turn the “ON/OFF SWITCH” switch of your ADSL2+ Combo Router on. - Page 6 ComTW263R4 Table 1, LED function Label Color Flash Green Ready Not Ready Power Off Ethernet Transmit / Receive Ethernet Green Connected Data Disconnected Connect to Green Disconnect to DSLAM DSLAM Connect to Transmit / Receive Disconnect to Green Internet Data Internet Transmit / Receive Green...
-
Page 7: Configuration Procedures
ADSL2+ Combo Modem Router Configuration Procedures Before starting the ADSL2+ Combo Router configuration, please kindly configure the PC computer as below, to have automatic IP address / DNS Server. For Windows 98SE / ME / 2000 / XP Click on "Start” -> “Control Panel” (in Classic View). In the Control Panel, double click on "Network Connections"... - Page 8 ComTW263R4 Double click on "Internet Protocol (TCP/IP)". Check "Obtain an IP address automatically” and “Obtain DNS server address automatically” then click on "OK" to continue. Click "Show icon in notification area when connected" (see screen image in 3. above) then Click on "OK" to complete the setup procedures.
- Page 9 ADSL2+ Combo Modem Router For Windows Vista-32/64 Click on “Start” -> “Control Panel” -> “View network status and tasks”. Single RIGHT click on “Local Area connection", then click "Properties".
- Page 10 ComTW263R4 Double click on "Internet Protocol Version 4 (TCP/IPv4)" The screen will display the information “User Account Control” and click “Continue” to continue. Double click on "Internet Protocol Version 4 (TCP/IPv4)".
- Page 11 ADSL2+ Combo Modem Router Check "Obtain an IP address automatically" and “Obtain DNS server address automatically” then click on "OK" to continue.
- Page 12 ComTW263R4 For Windows 7-32/64 Click on “Start” -> “Control Panel” (in Category View) -> “View network status and tasks”. In the Control Panel Home, click on “Change adapter settings” to continue.
- Page 13 ADSL2+ Combo Modem Router Double click on "Internet Protocol Version 4 (TCP/IPv4)" Double click on "Internet Protocol Version 4 (TCP/IPv4)".
- Page 14 ComTW263R4 Check "Obtain an IP address automatically" and “Obtain DNS server address automatically” then click on "OK" to continue.
-
Page 15: Internet Configuration Via Ethernet Port
ADSL2+ Combo Modem Router Internet Configuration via Ethernet Port Please insert the supplied CD into your CD-ROM drive. The CD should auto-start, displaying the window shown in 3. below. If your CD does not start automatically, go to Windows Explorer, Select your CD drive and double click “setup.exe”... - Page 16 ComTW263R4 Please click “Internet Configuration” button to continue. Please click “Internet connection” button to continue.
- Page 17 ADSL2+ Combo Modem Router Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds. When the “Information” screen pop-up, please click “OK” button to exit the program.
-
Page 18: Internet Configuration Via Usb Port
ComTW263R4 Internet Configuration via USB Port For Windows 98SE / ME / 2000 / XP Make sure to power on ADSL2+ Combo Router. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer. - Page 19 ADSL2+ Combo Modem Router Please choose your language and then click button to continue. To configure the device, please click “Configuration”...
- Page 20 ComTW263R4 Please click “Internet Configuration” to continue. Please click “USB connection” to continue.
- Page 21 ADSL2+ Combo Modem Router Please click “USB Driver Installation” to continue and wait for about 1 minute. Please choose your language and click “Next“ to continue.
- Page 22 ComTW263R4 Please click “Next“ to continue. Please select “Typical“ type and then click “Next“ to continue.
- Page 23 ADSL2+ Combo Modem Router Please click “Next“ to continue. USB Driver installation now You have already plugged in the USB cable so no need to plug it in again as per the screen request!!
- Page 24 ComTW263R4 Please click “OK“ to continue. (Only for Windows 98SE or ME version) Please enter “admin” as User name / “1234” as password, then click “OK”. (Only for Windows 2000 or XP version)
- Page 25 ADSL2+ Combo Modem Router Open the Webpage of ADSL2+ Combo Router at 192.168.1.1 as below. Close this Webpage immediately. (Only for Windows 2000 or XP version) Click “Finish” to complete the USB driver installation.
- Page 26 ComTW263R4 Waiting few seconds and the below screenshot will appear on your screen, Please click “Next” to continue. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds.
- Page 27 ADSL2+ Combo Modem Router When the “Information” screen pop-up, please click “OK” button to exit the program. You can now access the Internet !
- Page 28 ComTW263R4 For Windows XP-64bit Make sure to power on ADSL2+ Combo Router. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer. Once USB cable connected to ADSL2+ Combo Router and the following will appear on screen.
- Page 29 ADSL2+ Combo Modem Router Please choose your language and then click button to continue. To configure the device, please click “Configuration”...
- Page 30 ComTW263R4 Please click “Internet Configuration” to continue. Please click “USB connection” to continue.
- Page 31 ADSL2+ Combo Modem Router Please click “USB Driver Installation” to continue and wait for about 1 minute. Please click “Next “ to continue.
- Page 32 ComTW263R4 Please click “Next“ to continue. Please click “Next“ to continue.
- Page 33 ADSL2+ Combo Modem Router Please click “Next“ to continue. Please click “Next“ to continue. You have already plugged in the USB cable so no need to plug it in again as per the screen request!!
- Page 34 ComTW263R4 Please click “Continue Anyway“ to continue. Please click “Continue Anyway“ to continue.
- Page 35 ADSL2+ Combo Modem Router Click “Finish” to complete the USB driver installation. Waiting few seconds and the below screenshot will appear on your screen, Please click “Next” to continue.
- Page 36 ComTW263R4 Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds. When the “Information” screen pop-up, please click “OK” button to exit the program. You can now access the Internet !
- Page 37 ADSL2+ Combo Modem Router For Windows Vista-32 bit Make sure to power on ADSL2+ Combo Router Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer. Once USB cable connected to ADSL2+ Combo Router and the following will appear on screen.
- Page 38 ComTW263R4 The CD should auto-start, displaying as below. Please click “Run setup.exe” to continue. If your CD does not start automatically, go to Windows Explorer, Select your CD drive and click “setup.exe” The screen will display the information “User Account Control” and click “Allow”...
- Page 39 ADSL2+ Combo Modem Router To configure the device, please click “Configuration”. Please click “Internet Configuration” to continue.
- Page 40 ComTW263R4 Please click “USB connection” to continue. Please click “USB Driver installation” to continue.
- Page 41 ADSL2+ Combo Modem Router Please choose your language and click “Next“ to continue . Please click “Next“ to continue .
- Page 42 ComTW263R4 Please select “Typical“ and then click “Next“ to continue. Please click “Next“ to continue.
- Page 43 ADSL2+ Combo Modem Router Please click “Install this driver software anyway“ to continue. Please click “Finish“ to complete the USB driver installation.
- Page 44 ComTW263R4 Waiting few seconds and the below screenshot will appear on your screen, Please click “Next” to continue. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds.
- Page 45 ADSL2+ Combo Modem Router When the “Information” screen pop-up, please click “OK” button to exit the program. You can now access the Internet!
- Page 46 ComTW263R4 For Windows Vista-64 bit Make sure to Power on ADSL2+ Combo Router. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer. Once USB cable connected to ADSL2+ Combo Router and the following will appear on screen.
- Page 47 ADSL2+ Combo Modem Router Please insert the supplied CD into your CD-ROM drive. The CD should auto-start, displaying as below. Please click “Run setup.exe” to continue. If your CD does not start automatically, go to Windows Explorer, Select your CD drive and click “setup.exe” The screen will display the information “User Account Control”...
- Page 48 ComTW263R4 To configure the device, please click “Configuration” Please click “Internet Configuration” to continue.
- Page 49 ADSL2+ Combo Modem Router Please click “USB connection” to continue. Please click “USB Driver installation” to continue.
- Page 50 ComTW263R4 Please click “Next“ to continue. Please check “I accept the terms in the license agreement” and click “Next“ to continue.
- Page 51 ADSL2+ Combo Modem Router Please click “Next“ to continue. Please select “Complete” and click “Next” to continue.
- Page 52 ComTW263R4 Please click “Install“ to continue. Please click “Install this driver software anyway” to continue.
- Page 53 ADSL2+ Combo Modem Router Click “Finish” to complete the USB driver installation. Waiting few seconds and the below screenshot will appear on your screen, Please click “Next” to continue.
- Page 54 ComTW263R4 Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds. When the “Information” screen pop-up, please click “OK” button to exit the program. You can now access the Internet!
- Page 55 ADSL2+ Combo Modem Router For Windows 7-32/64bit Make sure to Power on ADSL2+ Combo Router. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer. Once USB cable connected to ADSL2+ Combo Router and the following will appear on screen.
- Page 56 ComTW263R4 The screen will display the information “User Account Control” and click “Yes” to continue Please choose your language and then click button to continue. To configure the device, please click “Configuration”...
- Page 57 ADSL2+ Combo Modem Router Please click “Internet Configuration” to continue. Please click “USB connection” to continue.
- Page 58 ComTW263R4 Please click “USB Driver installation” to continue. Please click “Next“ to continue. If you have already installed the USB driver, please click “Cancel“ to exit the installation of USB driver and it will bring you to step 15.
- Page 59 ADSL2+ Combo Modem Router Click “Finish” to complete the USB driver installation. Once the computer rebooted completely, please repeate steps above and click “Cancel“ on Step 12 to exit the installation of USB driver and go straight to Step 15 below.
- Page 60 ComTW263R4 Waiting few seconds and the below screenshot will appear on your screen. Please click “Next” to continue. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds.
- Page 61 ADSL2+ Combo Modem Router When the “Information” screen pop-up, please click “OK” button to exit the program. You can now access the Internet!
-
Page 62: Configuration Of Iptv Connection
ComTW263R4 Configuration of IPTV connection For Windows 98SE / ME / 2000 / XP / Vista / 7 Make sure to power on ADSL2+ Combo Router. Make sure that you have disconnected the Ethernet RJ45 cable. Please connect one end of the supplied USB cable to ADSL2+ Combo Router, and connect the other end of USB cable to the Computer. - Page 63 ADSL2+ Combo Modem Router Please insert the supplied CD into your CD-ROM drive. The CD should auto-start, displaying the window shown in 6. below. If your CD does not start automatically, go to Windows Explorer, Select your CD drive and click “setup.exe” Please choose your language and then click button to continue.
- Page 64 ComTW263R4 Please click “IPTV Connection” to continue. Please click “USB Driver installation” to continue and wait for about 1 minute.
- Page 65 ADSL2+ Combo Modem Router Please choose your language and click “Next“ to continue. If you want to install the USB Driver to Windows XP 64bit, Vista, 7 system, please refer to page.30 ~ page.34 for Windows XP 64bit, page.40 ~ page.42 for Windows Vista 32bit, page.49 ~ page.52 for Windows Vista 64bit, page.58 ~ page.59 for Windows 7.
- Page 66 ComTW263R4 Please select “Typical“ type and then click “Next“ to continue. Please click “Next“ to continue.
- Page 67 ADSL2+ Combo Modem Router USB Driver installation now You have already plugged in the USB cable so no need to plug it in again as per the screen request!! Please click “OK” to continue. (Only for Windows 98SE or ME version)
- Page 68 ComTW263R4 Please enter “admin” as User name / “1234” as password, then click “OK” Open the Webpage of ADSL2+ Combo Router at 192.168.1.1 as below. Close this Webpage immediately.
- Page 69 ADSL2+ Combo Modem Router Click “Finish” to complete the USB driver installation. Waiting few seconds and the below screenshot will appear on your screen. Make sure that the RJ-45 cable has been connected as below, please click “Next” to continue.
- Page 70 ComTW263R4 Waiting few seconds and the below screenshot will appear on your screen, Please click “Next” to continue. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”. Please wait for about 60 seconds.
- Page 71 ADSL2+ Combo Modem Router When the “Information” screen pop-up, please click “OK” button to configure the Internet setting, or click “Cancel” button to quit. Select your country, town, ISP and settings your ISP (Internet Services Provider) provided, and enter your required settings. Then press “Save Configuration”.
- Page 72 ComTW263R4 When the “Information” screen pop-up, please click “OK” button to exit the program. You can now access the Internet!
- Page 73 24/7 Toll Free Support USA/Canada : 1 (800) 457-3811 UPVEL Los Angeles, CA USA Tel: (310)891-1100 www.upvel.com UPVEL is a registered Trademark. All other trademarks belong to their respective proprietors. Designed in USA / Made in China 7435-0I87-00...