Attaching The Power Cord; Powering Up The Host Computer; Scanner Components - Kodak i620 User Manual

Attaching the power cord

Powering up the host
computer

Scanner components

A-61500 January 2004
The Kodak i600 Series Scanner is packed with a set of power cords.
1. Select the power cord which complies with your electrical
requirements and attach it.
2. Turn on the scanner and wait until the top green LED is lit indicating
the scanner has completed power-up self-test and is idle.
• Turn the power on to the host computer.
5
12
4
3
2
11 1
1 Elevator tray extender — open the elevator tray extender to
accommodate long documents.
2 Feed module — provides smooth document feeding of various
sizes, thicknesses and textures.
CAUTION: Moving parts, avoid contact.
3 Elevator tray side guides — slide the guides in or out to
accommodate the document size you want to scan.
Side guides can be left-, center- and right-adjusted to
accommodate documents of various widths.
4 Gap Release lever — allows you to manually adjust the space
between the feed module and separation roller for documents that
require special handling.
5 Output tray and End stop — collects the scanned documents.
The output tray width and end stop length can be adjusted.
Front view
10
6
8
7
9
2-3