Accessing The Operator Log - Kodak i620 User Manual

Accessing the
Operator Log
A-61500 January 2004
The Operator Log is accessed through the Scan Validation Tool.
1. Select Start>Programs>Kodak>Document Imaging>Scan
Validation Tool.
2. From the Driver Types box, select TWAIN.
3. From the Drivers box, select Kodak Scanner: i600 and click OK.
The main Scan Validation Tool screen will be displayed:
4. Select the Scanner icon.
5. Select the Info tab.
6. From the drop down box, select Operator Log. The Operator Log
will be displayed. Any messages that were posted to the Operator
Log will be displayed in the window. See the section entitled,
"Message listing" later in this chapter for an explanation of error
messages.
6-3