Changing between name tag display and frequency display
1. Recall the memory channel or the home channel to be changed.
2. Press the [ F ] key, then press the [ MODE ] key.
The display changes between the memory tag display and the frequency display.
• If a name tag has not been set for the memory/home channel, the beep sounds
and the display will not change.
If the memory channel or home channel is set to display the memory tag, pressing the [ F ] key
will temporarily display the frequency indication while " " is lighted.
The Memory Channel Only Mode
The FT-70DR/DE may be set to operated only in the registered memory channels.
1. While pressing the [ V/M ] key, press and hold the POWER (LOCK) switch to turn the
transceiver ON.
• The memory channel only mode is ON, the previously selected memory channel is
recalled.
• Rotating the DIAL knob may be selected.
• Inputting the 3 digits of the memory channel using the numeric keys may be re-
called the memory channel directly.
z In the memory only mode, only the following functions will operate:
• Changing the communication mode (press the [ MODE ] key)
• Group monitor (GM) function (press the [ GM ] key)
• The transmission mode setting of the AMS function (press the [ AMS ] key)
• Turning the AMS function ON or OFF (press and hold the [ AMS ] key)
• Setting of the DG-ID code (press and hold the [ MODE ] key)
• Reverse function (press the [ F ] key, and then press the [ HM/RV ] key)
• Audio level adjustment (press the VOL key)
• SQL level adjustment (press the [ F ] key, and then press the MONI/T-CALL switch)
• Key lock function (press the POWER (LOCK) switch
z Pressing the [ V/M ] key or the [ HM/VM ] key, will sound the beep, "M-ONLY" will be displayed,
and the function will not operate.
z Canceling Memory Only Mode
1. Turn the transceiver OFF; and then while pressing the [ V/M ] key, press and hold the
POWER (LOCK) switch to turn the transceiver ON.
14
FT-70DR/DE Advance Manual