System Configuration; Lan; Ipv4 Configuration - Cisco WAP125 Administrator's Manual

System Configuration

This chapter describes how to configure global system settings and perform diagnostics. It contains the
following topics:
•
•
•
•
•
•

LAN

This section describes how to configure the port, VLAN, LLDP, IPv4, and IPv6 settings on the WAP device.

IPv4 Configuration

Use the IPv4 Setting page to configure the IPv4 address.
Step 1 Select LAN > IPv4 Configuration.
Step 2 Configure the following IPv4 settings:
• Connection Type — By default, the DHCP client on the WAP device automatically broadcasts the requests for
network information. If you want to use a static IP address, you must disable the DHCP client and manually
configure the IP address and other network information.
Choose one of the following options:
◦DHCP — The WAP device acquires its IP address from a DHCP server on the LAN.
LAN, page 9
Time, page 15
Notification, page 17
User Accounts, page 21
Management, page 23
Security, page 30
C H A P T E R
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
2
9