Qos Association; Guest Access - Cisco WAP125 Administrator's Manual

QoS Association

Step 5
Click add a policy attr. You can add the other class map, but the class map count for this specific policy has the maximum
limit of 10.
Step 6 Click Save .
Note To delete or modify a QoS policy, select the QoS policy from the list and click Delete or
Edit.
QoS Association
The QoS Association page provides additional control over certain QoS aspects of the wireless and Ethernet
interface.
In addition to controlling the general traffic categories, the QoS allows you to configure the per-client
conditioning of the various microflows through the QoS Policy Name. The QoS Policy Name is a useful tool
for establishing general microflow definition and treatment characteristics that can be applied to each wireless
client, both inbound and outbound, when it is authenticated on the network.
To configure the QoS Association parameters:
Step 1 Select Client QoS > QoS Association.
Step 2 In the QoS Association Table, click ✚ to add a QoS association.
Step 3 From the QoS Policy Name drop down list, choose a QoS Policy name.
Step 4 Configure the following:
• Association Interface — Select the interface from the drop down list (2.4G-ciscosb, 5G-ciscosb or LAN0).
• Rate Limit (From AP to Client) — The maximum allowed transmission rate from the WAP device to the client
in bits per second (bps). The valid range is from 0 to 866Mbps.
• Rate Limit (From Client to AP) — The maximum allowed transmission rate from the client to the WAP device
in bits per second (bps). The valid range is from 0 to 866Mbps.
Step 5 Click Save.
An interface can be bound with either a QoS policy or an ACL, but not
Note
both.

Guest Access

You can configure the default CP instance on the WAP device. The CP instance is a defined set of instance
parameters. The instance can be associated with one or more VAPs.
When you use a wireless client connect to VAP, and access any URL, the web will hijack the URL to Web
Portal Locale page, which you are configure at Access Control/Guest Access page.
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
80
Access Control