Using The Access Point Setup Wizard - Cisco WAP125 Administrator's Manual

Using the Access Point Setup Wizard

Launching the Web-based Configuration Utility
Follow these steps to access the configuration utility from your computer to configure the WAP device:
1 Connect the WAP device to the same network (IP subnet) as your computer. The factory default IP address
configuration of the WAP device is DHCP. Make sure that your DHCP server is running and can be
accessed.
2 Locate the IP address of the WAP device.
a The WAP device can be accessed and managed by using the Cisco FindIT Network Discovery Utility.
b The WAP device is Bonjour-enabled and automatically broadcasts its services and listens for services
c Locate the IP address assigned by your DHCP server by accessing your router or DHCP server. See
3 Launch a web browser, such as Microsoft Internet Explorer.
4 In the address bar, enter the default DHCP address and press Enter.
5 Enter the default user name and password: cisco in the Username and Password fields.
6 Click Log In. The Access Point Setup Wizard appears.
Follow the Setup Wizard instructions to finish the installation. We strongly recommend that you use the Setup
Wizard for the first installation. See
Logging Out
By default, the configuration utility logs out after 10 minutes of inactivity. See
instructions on changing the default timeout period.
To log out, click Logout in the top right corner of the configuration utility.
Using the Access Point Setup Wizard
The first time that you log into the Access Point (or after it has been reset to the factory default settings), the
Access Point Setup Wizard appears to help you perform initial configurations. Follow these steps to complete
the wizard:
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
2
This utility enables you to automatically discover all supported Cisco devices in the same local network
segment as your computer. You can get a snapshot view of each device or launch the product
configuration utility to view and configure the settings. For more information, see
go/findit.
being advertised by other Bonjour-enabled devices. If you have a Bonjour- enabled browser, such as
Microsoft Internet Explorer with a Bonjour plug-in, or the Apple Mac Safari browser, you can find
the WAP device on your local network without knowing its IP address.
You can download the complete Bonjour for Microsoft Internet Explorer browser from Apple's website
by visiting: http://www.apple.com/bonjour/
your DHCP server instructions for more information.
.
Using the Access Point Setup Wizard, on page 2
Getting Started
http://www.cisco.com/
for more information.
Management, on page 23 for