Ricoh D146 Service Manual page 51

Caster Table Type M3
2.7 CASTER TABLE TYPE M3
⇒
2.7.1 ACCESSORY CHECK
No.
1
2
3
4
5
2.7.2 INSTALLATION PROCEDURE
· Removal of stabilizers must always be with the consent of the customer. Do not remove
them at your own judgment.
· The machine must be held at the correct locations, and must be lifted slowly.
· If it is lifted with force, handled carelessly or dropped, it will result in an injury.
· If installing this option, turn the power to the machine off, and unplug the power plug from
the wall socket.
· If it is installed when the power is on, it will result in an electric shock or malfunction.
· Be sure to join the machine and caster table to prevent equipment from falling over.
· If it is not joined, the machine will move or fall over, which will result in an injury.
SM
Description
Right Lower Cover
Securing Bracket
Screws (M4 × 10)
Screw with Spring Washer (M4 × 10)
Stud: Positioning: Table: Caster
2-45
Rev. 3/11/2014
Q'ty
1
2
2
1
3
5
D146/D147/D148/D149/D150