Internal Finisher SR3130
15. Attach the upper rear inner cover.
16. Attach the paper output cover.
·
Up to this point, the procedure is the same as punch unit installation (for fitting the
punch unit, refer to Step 3 and later of the Punch unit installation procedure).
17. Attach the connector cover.
18. Attach the main power switch cover, and close the duplex unit.
19. Slide the finisher right front cover [A] from left to right to attach it ( ×1).
20. Attach the inverter tray.
21. Attach the relay guide plate [B] to the finisher [A] ( ×2).
D146/D147/D148/D149/D150
2-126
SM