Ricoh D146 Service Manual page 164

11. Take a test copy, and then make sure that the Data Overwrite icon changes from "Dirty" (solid)
to "Dirty" (blinking), and then to "Clear".
NOTE:
•
If the Data Overwrite icon does not change to Clear, check to see if there are any active
Sample Print or Locked Print jobs. A Sample Print or Locked Print job can only be
overwritten after it has been executed.
•
The Dirty icon blinks while an overwrite is in progress.
•
If you use your machine for a while with Auto Erase Memory disabled, and then
suddenly enable it, the overwrite process may take 10 or more hours depending on
HDD usage.
Data Overwrite icon:
· Clear (There is no temporary data to be overwritten)
· Dirty (There is temporary data to be overwritten)
D146/D147/D148/D149/D150
Data Overwrite Security Unit Type H (D377)/ I (D362)
2-158 SM