Table of Contents
Advertisement
Main Machine Installation
·
Be careful not to trap the harness with the PCDU front cover. Place the excess
portion of the harness on the inside of the inner cover. Also, hook the harness in two
places [A].
14. Rotate the ITB contact/separation lever [A] clockwise, and set it to the position in the following
picture.
15. Attach the ITB unit front cover [A] with the screw provided (3×8) [B].
SM
2-13
D146/D147/D148/D149/D150
- Quick Links:
- Installation Requirements
Hide quick links:
Advertisement
Table of Contents
