Table of Contents
Advertisement
Rev. 5/26/2015
7. Connect the harness to the machine side connector which is back side of the controller board.
8. Reattach the controller board. ( ×4,
9. Connect the harness. (
10. Reattach all parts removed.
11. Turn the machine main power switch ON.
⇒
12. When you install the tray heater, the heater turns ON automatically when you plug it in and
the Energy Saving Mode is active.
·
The value set as 1 in SP5-805-01 (Anti-Condensation Heater) allows the heater to stay
on longer.
·
The condition is shown in the following chart Fig.1 when the value of 0 or 1 is set in
SP5-805-01.
·
Energy consumption will increase slightly when set as 1 in the SP.
Fig.1
D146/D147/D148/D149/D150
×7)
× 1)
2-208
Anti-Condensation Heater
SM
- Quick Links:
- Installation Requirements
Hide quick links:
Advertisement
Table of Contents
